GE 164D4290P024, 49-80065 owner manual Care and Cleaning, Operating Instructions

Page 22

Instructions

Care and cleaning of the range.

Safety

NOTE: The oven shelves may be cleaned in the self-cleaning oven. However, the shelves will darken in color, lose their luster and become hard to slide if cleaned during the self-cleaning cycle.

Oven Shelves

Clean the oven shelves with an abrasive cleanser or steel wool. After cleaning, rinse the shelves with clean water and dry with a clean cloth.

To make the shelves slide more easily, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

Operating Instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rail

Stop guide

 

 

 

 

Storage Drawer Removal

To remove the drawer:

Pull the drawer out until it stops.

Lift the front of the drawer until the stops clear the guides.

Remove the drawer.

To replace the drawer:

Place the drawer rails on the guides.

Push the drawer back until it stops.

Lift the front of the drawer and push back until the stops clear the guides.

Lower the front of the drawer and push back until it closes.

Care and Cleaning

After broiling, remove the broiler pan from the oven. Do not store a soiled broiler pan and grid anywhere in the range.

Broiler Pan & Grid

Do not clean the broiler pan or grid in a self- cleaning oven.

After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container.

Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.

Both the broiler pan and grid may be cleaned with a commercial oven cleaner.

Both the broiler pan and grid can also be cleaned in a dishwasher.

Troubleshooting Tips

Wire cover holder.

Oven Light Replacement

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

To remove the cover:

Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.

Do not remove any screws to remove the cover.

Replace bulb with a 40-watt appliance bulb.

To replace the cover:

Place it into groove of the light receptacle. Pull wire forward to the center of the cover until it snaps into place.

Connect electrical power to the range.

Consumer Support

Oven Heating Elements

Do not clean the bake element or the broil

To clean the oven floor, gently lift

element. Any soil will burn off when the

the bake element. Clean with warm

elements are heated.

soapy water.

 

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents RangesSelf-Cleaning Radiant Write the model and serial numbers here Model # Serial #All ranges can tip and injury could result Important Safety Notice Safety Instructions Operating InstructionsSafety Instructions ConsumerRadiant Surface Units Troubleshooting Tips CareCleaning Using the surface unitsSafety Instructions CareSelecting types of cookware Cleaning Operating Instructions SafetyConsumer Support Troubleshooting Tips InstructionsUsing the oven controls Oven Control, Clock and Timer Features and SettingsSafety Instructions Special features of your oven controlCare and Cleaning Instructions Operating Instructions Care and CleaningTroubleshooting Tips Consumer Support Tones at the End of a Timed CycleBefore you begin… TroubleshootingTips Aluminum FoilInstructions Operating SafetyHow to Set the Oven for Broiling Broiling GuideUsing the clock and timer Consumer Support Troubleshooting Tips CareHow to Set a Delayed Start and Automatic Stop How to Set an Immediate Start and Automatic StopSupport How to Set for Regular Baking/Roasting Troubleshooting Tips Care and CleaningHow to Exit the Sabbath Feature Operating InstructionsTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfType of margarine will affect baking performance Before a Clean Cycle Using the self-cleaning ovenOperating Instructions Safety How to Set the Oven for CleaningHow to Delay the Start of Cleaning After a Clean CycleControl Knobs Care and cleaning of the rangeHow to Remove Packaging Tape Oven VentControl Panel Safety Instructions OperatingPainted Surfaces Lift-Off Oven DoorCare and Cleaning Operating InstructionsTips Consumer Support Cleaning the glass cooktopSafety Instructions Operating Instructions CareCooktop Seal Instructions SafetyMetal Marks and Scratches Damage from Sugary Spills and Melted PlasticBefore You Call For Service… Problem Possible Causes What To DoBefore You Call For Service … Is on when you want During a clean cycleOpen after a Clean cycle Oven not clean after Crackling orDisplay flashes Power outageDisplay goes blank Unable to getWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration What GE Will Not Cover GE Electric Range WarrantyGE Will Provide Warrantor General Electric Company. Louisville, KYConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio

49-80065, 164D4290P024 specifications

The GE 164D4290P024, 49-80065 is a sophisticated and efficient component widely utilized in many applications across various industries. Known for its reliability and performance, it has become a vital part of numerous systems, particularly in the aerospace and defense sectors. This component showcases a blend of advanced technologies and robust designs that set it apart in a competitive market.

One of the standout features of the GE 164D4290P024, 49-80065 is its durability. Designed to withstand extreme environmental conditions, this component is engineered to resist high temperatures, vibrations, and various levels of contamination. Such durability ensures that it can operate reliably in challenging settings, making it suitable for aerospace applications where performance is critical.

The technology employed in the GE 164D4290P024, 49-80065 includes the use of advanced materials that enhance its mechanical properties while reducing weight. Weight reduction is crucial in aerospace, where every ounce matters for fuel efficiency and overall performance. The use of innovative materials not only contributes to its lightweight characteristics but also helps improve its longevity and reliability.

Another significant characteristic of this component is its compatibility with various systems. The GE 164D4290P024, 49-80065 is designed to integrate seamlessly with existing infrastructure, allowing for straightforward installation and operation. Its versatility makes it a preferred choice among engineers who seek dependable solutions that can be adapted to multiple applications without extensive modifications.

In terms of performance, the GE 164D4290P024, 49-80065 delivers consistent results, which is crucial in mission-critical applications. It is engineered to meet stringent performance standards, ensuring that it operates effectively under demanding conditions. This reliability is supported by rigorous testing protocols that confirm its capabilities in various scenarios.

Moreover, the maintenance of the GE 164D4290P024, 49-80065 is designed to be straightforward, reducing downtime and maintenance costs. This ease of maintenance can significantly improve operational efficiency, helping organizations save time and money.

In conclusion, the GE 164D4290P024, 49-80065 is a high-performance component characterized by its durability, advanced technologies, and compatibility with various systems. Its reliability in extreme conditions, lightweight properties, and ease of maintenance make it an invaluable asset in aerospace and defense applications, contributing to enhanced operational efficiency and effectiveness in diverse settings.
Top Page Image Contents