GE 49-80065 Using the surface units, Safety, Instructions Care, Cleaning, Consumer Support

Page 7

Using the surface units.

www.GEAppliances.com

Throughout this manual, features and appearance may vary from your model.

Safety

How to Set

Push the knob in and turn in either direction to the setting you want.

At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.

Be sure you turn the control knob to

OFF when you finish cooking.

AHOT COOKTOP indicator light will glow when any radiant element is turned on, and will remain on until the surface is cooled to approximately 150°F.

Indicator light will;

■come on when the unit is hot to the touch.

■stay on even after the unit is turned off.

■glow until the unit is cooled to approximately 150°F.

Instructions Operating

Dual Surface Unit Control Knob

The right front surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.

To use the small (6 inch) surface unit, turn the control knob to the SMALL BURNER settings.

To use the large (9 inch) surface unit, turn the control knob to the LARGE BURNER settings.

Instructions Care and

Temperature Limiter

Every radiant surface unit has a temperature limiter.

The temperature limiter protects the glass cooktop from getting too hot.

The temperature limiter may cycle the units off for a time if:

■The pan boils dry.

■The pan bottom is not flat.

■The pan is off center.

■There is no pan on the unit.

Cleaning

Home Canning Tips

Be sure the canner is centered over the surface unit.

Make sure the canner is flat on the bottom.

To prevent burns from steam or heat, use caution when canning.

Use recipes and procedures from reputable sources. These are available from manufacturers such as Ball® and Kerr® and the Department of Agriculture Extension Service.

Troubleshooting Tips

Wok Cooking

We recommend that you use only a flat-bottomed wok. They are available at your local retail store.

Do not use woks that have support rings.

Placing the ring over the surface unit will cause a build-up of heat that will damage the cooktop.

Use only flat-bottomed woks.

Do not use round bottom woks. You could be seriously burned if the wok tipped over.

7

Consumer Support

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Write the model and serial numbers here Model # Serial # RangesSelf-Cleaning RadiantAll ranges can tip and injury could result Safety Instructions Operating Instructions Important Safety NoticeConsumer Safety InstructionsRadiant Surface Units Tips Care TroubleshootingInstructions Care Using the surface unitsSafety CleaningInstructions Cleaning Operating Instructions SafetyConsumer Support Troubleshooting Tips Selecting types of cookwareOven Control, Clock and Timer Features and Settings Using the oven controlsSafety Instructions Special features of your oven controlCare and Cleaning Tones at the End of a Timed Cycle Instructions Care and CleaningTroubleshooting Tips Consumer Support Instructions OperatingAluminum Foil TroubleshootingTips Before you begin…Broiling Guide SafetyHow to Set the Oven for Broiling Instructions OperatingConsumer Support Troubleshooting Tips Care Using the clock and timerHow to Set a Delayed Start and Automatic Stop How to Set an Immediate Start and Automatic StopSupport Operating Instructions Troubleshooting Tips Care and CleaningHow to Exit the Sabbath Feature How to Set for Regular Baking/RoastingTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfType of margarine will affect baking performance How to Set the Oven for Cleaning Using the self-cleaning ovenOperating Instructions Safety Before a Clean CycleAfter a Clean Cycle How to Delay the Start of CleaningOven Vent Care and cleaning of the rangeHow to Remove Packaging Tape Control KnobsLift-Off Oven Door Safety Instructions OperatingPainted Surfaces Control PanelOperating Instructions Care and CleaningOperating Instructions Care Cleaning the glass cooktopSafety Instructions Tips Consumer SupportDamage from Sugary Spills and Melted Plastic Instructions SafetyMetal Marks and Scratches Cooktop SealProblem Possible Causes What To Do Before You Call For Service…Before You Call For Service … Crackling or During a clean cycleOpen after a Clean cycle Oven not clean after Is on when you wantUnable to get Power outageDisplay goes blank Display flashesWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Warrantor General Electric Company. Louisville, KY GE Electric Range WarrantyGE Will Provide What GE Will Not CoverReal Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website

49-80065, 164D4290P024 specifications

The GE 164D4290P024, 49-80065 is a sophisticated and efficient component widely utilized in many applications across various industries. Known for its reliability and performance, it has become a vital part of numerous systems, particularly in the aerospace and defense sectors. This component showcases a blend of advanced technologies and robust designs that set it apart in a competitive market.

One of the standout features of the GE 164D4290P024, 49-80065 is its durability. Designed to withstand extreme environmental conditions, this component is engineered to resist high temperatures, vibrations, and various levels of contamination. Such durability ensures that it can operate reliably in challenging settings, making it suitable for aerospace applications where performance is critical.

The technology employed in the GE 164D4290P024, 49-80065 includes the use of advanced materials that enhance its mechanical properties while reducing weight. Weight reduction is crucial in aerospace, where every ounce matters for fuel efficiency and overall performance. The use of innovative materials not only contributes to its lightweight characteristics but also helps improve its longevity and reliability.

Another significant characteristic of this component is its compatibility with various systems. The GE 164D4290P024, 49-80065 is designed to integrate seamlessly with existing infrastructure, allowing for straightforward installation and operation. Its versatility makes it a preferred choice among engineers who seek dependable solutions that can be adapted to multiple applications without extensive modifications.

In terms of performance, the GE 164D4290P024, 49-80065 delivers consistent results, which is crucial in mission-critical applications. It is engineered to meet stringent performance standards, ensuring that it operates effectively under demanding conditions. This reliability is supported by rigorous testing protocols that confirm its capabilities in various scenarios.

Moreover, the maintenance of the GE 164D4290P024, 49-80065 is designed to be straightforward, reducing downtime and maintenance costs. This ease of maintenance can significantly improve operational efficiency, helping organizations save time and money.

In conclusion, the GE 164D4290P024, 49-80065 is a high-performance component characterized by its durability, advanced technologies, and compatibility with various systems. Its reliability in extreme conditions, lightweight properties, and ease of maintenance make it an invaluable asset in aerospace and defense applications, contributing to enhanced operational efficiency and effectiveness in diverse settings.
Top Page Image Contents