Adjust the oven thermostat-Do it yourself | GE 49-80065 specification

Adjust the oven thermostat—Do it yourself!

www.GEAppliances.com

You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the thermostat yourself.

Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your oven. These thermometers may vary 20–40 degrees.

NOTE: This adjustment will not affect the broiling or the self-cleaning temperatures. The adjustment will be retained in memory after a power failure.

To Adjust the Thermostat

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the BAKE pad. A two digit number shows in the display.

Press BAKE once to decrease (-) the oven temperature, or twice to increase (+).

The oven temperature can be adjusted up as much as 35°F. or down as much as 35°F. Press the number pads the same way you read them. For example, to change the oven temperature 15°F., press

1and 5.

When you have made the adjustment, press the START pad to go back to the time of day display. Use your oven as you would normally.

The type of margarine will affect baking performance!

Most recipes for baking have been developed using high fat products such as butter or margarine (80% fat). If you decrease the fat, the recipe may not give the same results as with a higher fat product.

Recipe failure can result if cakes, pies, pastries, cookies or candies are made with low fat spreads. The lower the fat content of a spread product, the more noticeable these differences become.

Federal standards require products labeled “margarine” to contain at least 80% fat by weight. Low fat spreads, on the other hand, contain less fat and more water. The high moisture content of these spreads affects the texture and flavor of baked goods. For best results with your old favorite recipes, use margarine, butter or stick spreads containing at least 70% vegetable oil.

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

49-80065, 164D4290P024 specifications

The GE 164D4290P024, 49-80065 is a sophisticated and efficient component widely utilized in many applications across various industries. Known for its reliability and performance, it has become a vital part of numerous systems, particularly in the aerospace and defense sectors. This component showcases a blend of advanced technologies and robust designs that set it apart in a competitive market.

One of the standout features of the GE 164D4290P024, 49-80065 is its durability. Designed to withstand extreme environmental conditions, this component is engineered to resist high temperatures, vibrations, and various levels of contamination. Such durability ensures that it can operate reliably in challenging settings, making it suitable for aerospace applications where performance is critical.

The technology employed in the GE 164D4290P024, 49-80065 includes the use of advanced materials that enhance its mechanical properties while reducing weight. Weight reduction is crucial in aerospace, where every ounce matters for fuel efficiency and overall performance. The use of innovative materials not only contributes to its lightweight characteristics but also helps improve its longevity and reliability.

Another significant characteristic of this component is its compatibility with various systems. The GE 164D4290P024, 49-80065 is designed to integrate seamlessly with existing infrastructure, allowing for straightforward installation and operation. Its versatility makes it a preferred choice among engineers who seek dependable solutions that can be adapted to multiple applications without extensive modifications.

In terms of performance, the GE 164D4290P024, 49-80065 delivers consistent results, which is crucial in mission-critical applications. It is engineered to meet stringent performance standards, ensuring that it operates effectively under demanding conditions. This reliability is supported by rigorous testing protocols that confirm its capabilities in various scenarios.

Moreover, the maintenance of the GE 164D4290P024, 49-80065 is designed to be straightforward, reducing downtime and maintenance costs. This ease of maintenance can significantly improve operational efficiency, helping organizations save time and money.

In conclusion, the GE 164D4290P024, 49-80065 is a high-performance component characterized by its durability, advanced technologies, and compatibility with various systems. Its reliability in extreme conditions, lightweight properties, and ease of maintenance make it an invaluable asset in aerospace and defense applications, contributing to enhanced operational efficiency and effectiveness in diverse settings.