GE 49-80065 Using the oven controls, Oven Control, Clock and Timer Features and Settings

Page 9

Using the oven controls.

www.GEAppliances.com

Throughout this manual, features and appearance may vary from your model.

Oven Control, Clock and Timer Features and Settings

BAKE Pad

KITCHEN TIMER ON/OFF Pad

Press this pad to select the bake function.

Press this pad to select the timer feature.

Safety Instructions Operating Instructions Care

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode and the times set for the timer or automatic oven operations.

If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code.

If your oven was set for a timed oven operation and

a power outage occurred, the clock and all programmed functions must be reset.

The time of day will flash in the display when there has been a power outage.

COOKING TIME Pad

Press this pad and then press the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

DELAY START Pad

Use along with COOKING TIME or SELF CLEAN pads to set the oven to start and stop automatically at a time you set.

CLOCK Pad

Press this pad before setting the clock.

TOP LIGHT Pad

Press this pad to turn the surface light on or off.

CLEAR/OFF Pad

Press this pad to cancel ALL oven operations except the clock and timer.

Number Pads

Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and self-cleaning.

START Pad

Must be pressed to start any cooking or cleaning function.

SELF CLEAN Pad

Press this pad to select the self-cleaning function. See the Using the self-cleaning oven section.

Do not lock the oven door with the latch during cooking. The latch is used for self-cleaning only.

OVEN LIGHT Pad

Press this pad to turn the oven light on or off.

BROIL HI/LO Pad

Press this pad to select the broil function.

and Cleaning Troubleshooting Tips Consumer Support

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Write the model and serial numbers here Model # Serial # RangesSelf-Cleaning RadiantAll ranges can tip and injury could result Safety Instructions Operating Instructions Important Safety NoticeConsumer Safety InstructionsRadiant Surface Units Tips Care TroubleshootingSafety Using the surface unitsCleaning Instructions CareConsumer Support Troubleshooting Tips Cleaning Operating Instructions SafetySelecting types of cookware InstructionsOven Control, Clock and Timer Features and Settings Using the oven controlsSpecial features of your oven control Safety InstructionsCare and Cleaning Troubleshooting Tips Consumer Support Instructions Care and CleaningInstructions Operating Tones at the End of a Timed CycleTips TroubleshootingBefore you begin… Aluminum FoilHow to Set the Oven for Broiling SafetyInstructions Operating Broiling GuideConsumer Support Troubleshooting Tips Care Using the clock and timerHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopSupport How to Exit the Sabbath Feature Troubleshooting Tips Care and CleaningHow to Set for Regular Baking/Roasting Operating InstructionsAdjust the oven thermostat-Do it yourself To Adjust the ThermostatType of margarine will affect baking performance Operating Instructions Safety Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningAfter a Clean Cycle How to Delay the Start of CleaningHow to Remove Packaging Tape Care and cleaning of the rangeControl Knobs Oven VentPainted Surfaces Safety Instructions OperatingControl Panel Lift-Off Oven DoorOperating Instructions Care and CleaningSafety Instructions Cleaning the glass cooktopTips Consumer Support Operating Instructions CareMetal Marks and Scratches Instructions SafetyCooktop Seal Damage from Sugary Spills and Melted PlasticProblem Possible Causes What To Do Before You Call For Service…Before You Call For Service … Open after a Clean cycle Oven not clean after During a clean cycleIs on when you want Crackling orDisplay goes blank Power outageDisplay flashes Unable to getWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Provide GE Electric Range WarrantyWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

49-80065, 164D4290P024 specifications

The GE 164D4290P024, 49-80065 is a sophisticated and efficient component widely utilized in many applications across various industries. Known for its reliability and performance, it has become a vital part of numerous systems, particularly in the aerospace and defense sectors. This component showcases a blend of advanced technologies and robust designs that set it apart in a competitive market.

One of the standout features of the GE 164D4290P024, 49-80065 is its durability. Designed to withstand extreme environmental conditions, this component is engineered to resist high temperatures, vibrations, and various levels of contamination. Such durability ensures that it can operate reliably in challenging settings, making it suitable for aerospace applications where performance is critical.

The technology employed in the GE 164D4290P024, 49-80065 includes the use of advanced materials that enhance its mechanical properties while reducing weight. Weight reduction is crucial in aerospace, where every ounce matters for fuel efficiency and overall performance. The use of innovative materials not only contributes to its lightweight characteristics but also helps improve its longevity and reliability.

Another significant characteristic of this component is its compatibility with various systems. The GE 164D4290P024, 49-80065 is designed to integrate seamlessly with existing infrastructure, allowing for straightforward installation and operation. Its versatility makes it a preferred choice among engineers who seek dependable solutions that can be adapted to multiple applications without extensive modifications.

In terms of performance, the GE 164D4290P024, 49-80065 delivers consistent results, which is crucial in mission-critical applications. It is engineered to meet stringent performance standards, ensuring that it operates effectively under demanding conditions. This reliability is supported by rigorous testing protocols that confirm its capabilities in various scenarios.

Moreover, the maintenance of the GE 164D4290P024, 49-80065 is designed to be straightforward, reducing downtime and maintenance costs. This ease of maintenance can significantly improve operational efficiency, helping organizations save time and money.

In conclusion, the GE 164D4290P024, 49-80065 is a high-performance component characterized by its durability, advanced technologies, and compatibility with various systems. Its reliability in extreme conditions, lightweight properties, and ease of maintenance make it an invaluable asset in aerospace and defense applications, contributing to enhanced operational efficiency and effectiveness in diverse settings.
Top Page Image Contents