Amana Smoothtop important safety instructions Off. This is normal

Page 23

Troubleshooting

PROBLEM

SOLUTION

Smoothtop surface shows

1.

Tiny scratches or abrasions.

wear.

 

• Make sure cooktop and pan bottom are clean. Do not slide glass or metal pans

 

 

across top. Make sure pan bottom is not rough. Use the recommended

 

 

cleaning agents. See page 17.

 

2.

Metal marks.

 

 

• Do not slide metal pans across top. When cool, clean with Cooktop

 

 

Cleaning Creme. See page 17.

 

3.

Brown streaks and specks.

 

 

• Remove spills promptly. Never wipe with a soiled cloth or sponge. Make sure

 

 

cooktop and pan bottom are clean.

 

4.

Areas with a metallic sheen.

 

 

• Mineral deposits from water and food. Use recommended cleaning agents.

 

 

See page 17.

 

5.

Pitting or flaking.

 

 

• Remove sugary boilovers promptly. See page 17.

 

 

 

Moisture collects on oven

This is normal when cooking foods high in moisture.

window or steam comes from

Excessive moisture was used when cleaning the window.

oven vent.

 

 

 

 

 

There is a strong odor or light

This is normal for a new range and will disappear after a few uses. Initiating a clean

smoke when oven is turned on.

 

cycle will “burn off” the odors more quickly.

 

Turning on a ventilation fan will help remove the smoke and/or odor.

 

Excessive food soils on the oven bottom. Use a self-clean cycle.

 

 

 

Fault Codes

BAKE or LOCK may flash rapidly in the display to alert you if there is an error

 

 

or a problem. If BAKE or LOCK appear in the display, press CANCEL pad.

 

 

If BAKE or LOCK continue to flash, disconnect power to the appliance.

 

 

Wait a few minutes, and then reconnect power. If the flashing still continues,

 

 

disconnect power to the appliance and call an authorized servicer.

 

If the oven is heavily soiled, excessive flareups may result in a fault code during

 

 

cleaning. Press the CANCEL pad and allow the oven to cool completely, wipe out

 

 

excess soil, then reset the clean cycle. If the fault code reappears, contact an

 

 

authorized servicer.

 

 

 

Noises may be heard.

The oven makes several low level noises. You may hear the oven relays as they go on

 

 

and off. This is normal.

 

As the oven heats and cools, you may hear sounds of metal parts expanding and

 

 

contracting. This is normal and will not damage your appliance.

 

 

 

There are no beeps and

Oven may be in Sabbath Mode. See page 12.

no display.

 

 

 

 

 

22

Image 23
Contents Electric Range Smoothtop To Prevent Fire or Smoke Damage Child SafetyRecognize Safety Symbols, Words, Labels InstructionsAbout Your Appliance Important Safety InstructionsCooking Safety Utensil SafetyCooktop Self-Clean OvenCleaning Safety Important Safety Notice and WarningSurface Controls Suggested Heat SettingsSetting the Controls Tips to Protect Smoothtop Surface Smoothtop SurfaceRuler Test Cookware RecommendationsCanning and Oversize Cookware Flat Pan TestsClock Using the TouchpadsOven Cooking Control PanelLocking the Control TimerFault Codes Baking Differences Between Your Old and New Oven BakingCook & Hold Baking NotesDelay Bake Keep Warm Notes To cancel Keep WarmPress the Cancel pad Remove food from the oven Keep WarmSabbath Mode Notes Automatic Shut-Off/Sabbath ModeAdjusting the Oven Temperature Rack Total Foods Position Broiling ChartBroiling Broil NotesOven Racks Oven VentOven Light Oven BottomTo Delay a Self-Clean Cycle Before Self-CleaningTo set Self-Clean After Self-Cleaning During the Self-Clean CyclePart Procedure Care & CleaningCleaning Procedures Stainless Steel FirstGlass Movement, then wipe off excess oilOven Window MaintenanceOven Door Leveling LegsCanadian models only Press the switch located on the lower edgeStorage Drawer Convenience OutletProblem Solution TroubleshootingOff. This is normal If You Need Service Warranty & ServiceWhat is Not Covered By These Warranties Cuisinière électrique dessus lisse Les instructions de sécurité importantes et les paragraphes Pour éviter un incendie ou des dommages par la fuméeCuisson et sécurité En cas d’incendieSécurité pour les enfants Familiarisation avec l’appareilHottes d’extraction Ustensiles et sécuritéTable de cuisson FriteusesConserver ces instructions pour consultation ultérieure Nettoyage et sécuritéFour autonettoyant Avertissement et avis important pour la sécuritéSuggestions pour le réglage Boutons de commandeRéglage des commandes Cuisson sur la surfaceConseils de protection de la surface à dessus lisse Surface à dessus lisseTests pour vérifier si les ustensiles ont un fond plat Recommandations sur les ustensilesUstensiles de grande taille et pour les conserves Pour éviter d’autres dommagesHorloge Tableau de commandeCuisson dans le four Utilisation des touchesCodes d’anomalie Verrouillage des commandesMinuterie Différences de cuisson entre l’ancien four et le nouveau Cuisson couranteCuisson et maintien Remarques sur la cuisson courante au fourCuisson différée Annulation du maintien au chaud Maintien au chaudRemarques sur la fonction maintien au chaud Programmation du maintien au chaudAjustement de la température du four Remarques sur le mode sabbatAnnulation du mode sabbat Arrêt automatique/Mode sabbatPosition Degré DE Temps DE Cuisson Aliments Cuisson au grilTableau de cuisson au gril Remarques sur la cuisson au grilGrilles du four Évent du fourÉclairage du four Sole du fourDémarrage différé d’un cycle d’autonettoyage NettoyageAvant l’autonettoyage Programmation de l’autonettoyageRemarques Après le cycle d’autonettoyagePendant le cycle d’autonettoyage Pièce Nettoyage Méthodes de nettoyagePorte, panneaux Vaporisant d’abord sur un linge’excédent Hublot du four EntretienPorte du four Lampe du fourModèles canadiens seulement Tiroir de remisagePrise de courant auxiliaire DéposeRecherche des pannes Problème SolutionVerrouillage sur l’afficheur Nettoyage recommandés. VoirLa porte du four ne se déverrouille Pas après l’autonettoyageRemarques Si l’intervention d’un réparateur est nécessaire Garantie et service après-venteNe sont pas couverts par ces garanties Estufa Eléctrica Cubierta Lisa Canadá Para Evitar un Incendio o Daño Causado por el HumoFecha de Compra Seguridad al Cocinar En Caso de IncendioSeguridad para los Niños Instrucciones GeneralesCubierta Seguridad sobre el Uso de UtensiliosHorno Autolimpiante Ollas FreidorasCampanas de Ventilación Seguridad en la LimpiezaProgramación de los Controles Cocinando en la EstufaControles Superiores Ajustes de Calor SugeridosConsejos para proteger la cubierta lisa Cubiertas LisasPrueba de las Ollas Planas Recomendaciones sobre los utensiliosUtensilios para preparar conservas y de tamaños grandes Para evitar otros daños‘Clock’ Reloj Cocinando en el HornoPanel de Control Uso de las TeclasBloqueo de los Controles ‘Timer’ TemporizadorCódigos de Errores Notas sobre Horneado ‘Bake’ Horneado‘Cook & Hold’ Cocción y Mantener Caliente ‘Delay Bake’ Horneado Diferido Notas sobre ‘Keep Warm’ Para cancelar ‘Keep Warm’Oprima la tecla ‘Cancel’ Retire el alimento del horno ‘Keep Warm’ Mantener CalienteNotas Sobre el Modo Sabático Cierre Automático/Modo SabáticoAjuste de la temperatura del horno Termino DE Tiempo Total DE Alimentos ‘Broiling’ Asar a la ParrillaNotas Sobre Asado a la Parrilla Tabla de Asar a la ParrillaParrillas del Horno Respiradero del HornoPanel Inferior del Horno Posiciones de la ParrillaPara diferir un ciclo de autolimpieza Para programar ‘Self-Clean’ AutolimpiezaAntes de la Autolimpieza Notas Durante el ciclo de autolimpiezaDespués del ciclo de autolimpieza Pieza Procedimiento DE Limpieza Procedimientos de LimpiezaCuidado y Limpieza Luz del Horno MantenimientoPuerta del Horno Ventana del HornoEl disyuntor del tomacorriente para Gaveta de AlmacenamientoTomacorriente para Electrodomésticos Pequeños Modelos Canadienses solamenteLocalización y Solución de Averías Problema SolucionManchas y estrías marrones Códigos de ErroresMarcas de metal Crema para Limpieza de Cubiertas. Ver págNotas Si Necesita Servicio Garantía y ServicioLo que No Cubren Estas Garantías