Amana Coil Oven Vent, Oven Light, Oven Bottom, Rack Positions, Oven Racks

Page 15

Oven Cooking

Oven Vent

When the oven is in use, the area near the vent may become hot enough to cause burns. Never block the vent opening.

OVEN VENT

•Be sure the drip bowl in the vent location has a hole in the center. Do not cover

the drip bowl with aluminum foil.

OVEN VENT

 

OPENING

Oven Light

Press the Oven Light switch on the control panel to turn the oven light on and off.

Oven Bottom

Protect oven bottom against spillovers, especially acidic or sugary spills, as they may discolor the porcelain enamel. Use the correct pan size to avoid spillovers and boilovers. Do not place utensils or aluminum foil directly on the oven bottom.

To replace:

1.Place rack on the rack support in the oven

2.Tilt the front end up slightly. Slide rack back until it clears the lock-stop position.

3.Lower front and slide back into the oven.

Do not cover an entire rack with aluminum foil or place foil on the oven bottom. Baking results will be affected and damage may occur to the oven bottom.

Rack Positions

RACK 5 (highest position): Used for toasting bread or broiling thin, non-fatty foods.

RACK 4: Used for most broiling.

RACK 3: Used for most baked goods on a

cookie sheet or jelly roll pan, layer cakes, fruit pies, or frozen convenience foods.

RACK 2: Used for roasting small cuts of meat, casseroles, baking loaves of bread, bundt cakes or custard pies.

RACK 1: Used for roasting large cuts of meat and poultry, frozen pies, dessert souffles or angel food cake.

MULTIPLE RACK COOKING:

Two rack: Use rack positions 2 and 4, or 1 and 4.

Oven Racks

CAUTION

•Do not attempt to change the rack position when the oven is hot.

•Do not use the oven for storing food or cookware.

The oven has two racks. All racks are designed with a lock- stop edge.

To remove:

1. Pull rack straight out until it stops at the lock-stop posi- tion.

2. Lift up on the front of the rack and pull out.

Half Rack Accessory

A half rack, to increase oven capacity, is available as an acces- sory. It fits in the left, upper portion of the oven and provides space for a vegetable dish when a large roaster is on the lower rack. Contact your dealer for the “HALFRACK” Acces- sory Kit or call 1-877-232-6771 USA or 1-800-688-8408 Canada.

14

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Electric Range Coil Case of Fire Recognize Safety Symbols, Words, LabelsInstructions To Prevent Fire or Smoke DamageUtensil Safety Important Safety InstructionsChild Safety Cooking SafetyCooktop Self-Clean Oven select modelsImportant Safety Notice and Warning Cleaning SafetySuggested Heat Settings Setting the ControlsSurface Controls To protect drip bowl finish Coil Element SurfaceCoil Elements Drip BowlsSetting the Clock Manual Clean Oven ControlUsing the Touchpads Setting the TimerSetting the Controls For Baking or Roasting Setting the Controls For BroilingBaking, Roasting and Broiling To change the clock to 24-hour format Self-Clean Oven ControlClock G H I JBaking TimerFault Codes Locking the ControlsBaking Differences Between Your Old and New Oven Delay BakeCook & Hold Baking NotesKeep Warm Notes Keep WarmAutomatic Shut-Off/Sabbath Mode Adjusting the Oven TemperatureSabbath Mode Notes Rack Total Foods Position Broiling ChartBroiling Broil NotesRack Positions Oven VentOven Light Oven BottomBefore Self-Cleaning To set Self-CleanTo Delay a Self-Clean Cycle After Self-Cleaning During the Self-Clean CycleCare & Cleaning Cleaning ProceduresPart Procedure Follow with Stainless Steel Magic Spray Is not wiped up, it may discolor the porcelainSelect models 20000008To protect the oven door window MaintenanceOven Door Oven WindowCanadian models only Leveling LegsStorage Drawer Convenience OutletProblem Solution TroubleshootingServicer Noises may be heardOff. This is normal If You Need Service Warranty & ServiceWarranty What is Not Covered By These WarrantiesCuisinière électrique en éléments spiralés Les instructions de sécurité importantes et les paragraphes Pour éviter un incendie ou des dommages de fuméeToute Cuisinière Peut Basculer ET Provoquer DES Blessures Avertissement Pour réduire leCuisson et sécurité En cas d’incendieSécurité pour les enfants Familiarisation avec l’appareilFriteuses Ustensiles et sécuritéTable de cuisson Éléments spiralésConserver ces instructions pour consultation ultérieure Nettoyage et sécuritéFour autonettoyant Avertissement et avis important pour la sécuritéSuggestions pour le réglage Boutons de commandeRéglage des commandes Cuisson sur la surfaceCuvettes de récupération Éléments de la table de cuissonRemarques Éléments spiralésProgrammation de la minuterie Commandes du four à nettoyage manuel certains modèlesCuisson dans le four Utilisation des touchesProgrammation des commandes pour la cuisson au gril Cuisson courante, rôtissage et cuisson au grilChoisir le réglage Hi pour un gril normal Changement de l’horloge à un format de 24 heures Commandes du four à autonettoyage certains modèlesHorloge BC D G H I JVerrouillage des commandes MinuterieCodes d’anomalie Remarques sur la cuisson courante au four Cuisson couranteCuisson et maintien Différences de cuisson entre l’ancien four et le nouveauCuisson courante différée Annulation du maintien au chaud Maintien au chaudRemarques sur la fonction maintien au chaud Programmation du maintien au chaudAjustement de la température du four Remarques sur le mode sabbatAnnulation du mode sabbat Arrêt automatique/Mode sabbatPosition Degré DE Temps DE Cuisson Aliments Cuisson au grilRemarques sur la cuisson au gril Tableau de cuisson au grilPositions des grilles Évent du fourÉclairage du four Sole du fourDémarrage différé d’un cycle d’autonettoyage NettoyageAvant l’autonettoyage Programmation de l’autonettoyageAprès le cycle d’autonettoyage Pendant le cycle d’autonettoyageMéthodes de nettoyage Sécher Certains modèles En le vaporisant d’abord sur un lingeRisqueraient de rayer le verre Grilles du four Nettoyer avec de l’eau savonneuseLampe du four EntretienPorte du four Hublot du fourDépose Pieds de réglage de l’aplombTiroir de remisage Prise de courant auxiliaireRecherche des pannes Problème Solution’appareil et prendre contact avec un réparateur autorisé Fumée lors de la mise en marcheOpération d’autonettoyage Codes d’anomalieSi vous avez besoin d’aide Garantie et service après-venteGarantie Ne sont pas couverts par ces garantiesEstufa Eléctrica con Elementos Tubulares Para Evitar un Incendio o Daño Causado por el Humo Fecha de CompraEn EE. UU En Canadá Seguridad al Cocinar En Caso de IncendioSeguridad para los Niños Instrucciones GeneralesOllas Freidoras CubiertaSeguridad sobre el Uso de Utensilios Elementos TubularesConserve estas instrucciones para referencia futura Seguridad en la LimpiezaHorno Autolimpiante Aviso y Advertencia Importante Sobre SeguridadAjustes de Calor Sugeridos Cocinando en la EstufaControles Superiores Programación de los ControlesPlatillos Protectores Superficie de los Elementos TubularesNotas Elementos TubularesProgramación del Temporizador Cocinando en el HornoControles del Horno de Limpieza Manual Uso de las TeclasHorneado, Asado y Asado a la Parrilla Ajuste de los Controles para Asar a la ParrillaMayores tiempos de cocción tales como la carne de ave Programación del Reloj Controles del Horno Autolimpiante modelos selectos‘Clock’ Reloj Para cambiar el reloj a formato de 24 horasCódigos de Errores ‘Timer’ TemporizadorBloqueo de los Controles Mantener Caliente ‘Cook & Hold’ Cocción y‘Bake’ Horneado Notas sobre Horneado‘Delay Bake’ Horneado Diferido Notas sobre ‘Keep Warm’ Para cancelar ‘Keep Warm’Oprima la tecla ‘CANCEL’ Retire el alimento del horno ‘Keep Warm’ Mantener CalienteCierre Automático/Modo Sabático Ajuste de la Temperatura del HornoNotas Sobre el Modo Sabático Termino DE Tiempo Total DE Alimentos ‘Broiling’ Asar a la ParrillaNotas Sobre Asado a la Parrilla Tabla de Asar a la ParrillaPosiciones de la Parrilla Respiradero del HornoPanel Inferior del Horno Parrillas del HornoNota Para la limpieza manual, ver página Para programar ‘Self-Clean’ AutolimpiezaAntes de la Autolimpieza Para diferir un ciclo de autolimpiezaDespués del Ciclo de Autolimpieza Durante el Ciclo de AutolimpiezaPieza Procedimiento DE Limpieza Procedimientos de LimpiezaCuidado y Limpieza Luz del Horno MantenimientoPuerta del Horno Ventana del HornoModelos Canadienses solamente Tornillos NiveladoresTomacorriente para Electrodomésticos Pequeños Gaveta de AlmacenamientoLocalización y Solución de Averías Problema SoluciónSe apagan. Esto es normal Códigos de ErroresModelos selectos Se escuchan ruidosSi necesita servicio Garantía y ServicioGarantía Lo que no cubren estas garantías

Coil specifications

Amana Coil is a leading manufacturer of high-quality heating and cooling products, recognized for its innovative technologies and commitment to energy efficiency. One of the key features that distinguishes Amana Coil from its competitors is its advanced coil design, which significantly enhances the performance of the HVAC systems. The coils are constructed using high-grade copper and aluminum materials that not only provide superior thermal conductivity but also ensure longer service life.

One of the notable technologies employed in Amana Coil products is the use of advanced refrigerant technology. The use of eco-friendly refrigerants, such as R-410A, helps reduce the environmental impact while maintaining excellent cooling efficiency. This is especially crucial in today's market, where environmental sustainability is becoming a top priority for both consumers and manufacturers.

Amana Coil products also incorporate multi-stage cooling and heating systems. This technology allows for better temperature control and more consistent comfort levels within the home. By adjusting the output based on current heating or cooling demands, these systems are able to operate more efficiently, leading to lower energy bills. Additionally, the variable-speed fan motors found in many Amana Coil models provide enhanced airflow and reduced noise levels, contributing to a more pleasant indoor environment.

Durability is another critical characteristic of Amana Coil products. The precision-engineered coils are designed to withstand a variety of harsh operating conditions, ensuring longevity and reliability. The units are subject to rigorous testing, which guarantees that they can handle extreme temperatures and moisture levels without compromising performance.

Moreover, Amana Coil offers excellent warranty coverage, often providing a limited lifetime warranty on the compressor and a 10-year parts limited warranty. This reinforces the brand's confidence in its products and offers peace of mind to customers.

In summary, Amana Coil stands out in the HVAC market due to its attention to high-quality materials, energy-efficient technologies, and robust design. By focusing on innovative solutions and sustainable practices, Amana Coil continues to lead the way in providing superior heating and cooling systems that meet the needs of both residential and commercial customers. Buyers looking for reliable, efficient, and eco-friendly HVAC solutions will find Amana Coil a top choice in today's competitive market.
Top Page Image Contents