Amana Coil Before Self-Cleaning, To set Self-Clean, To Delay a Self-Clean Cycle

Page 16

Care & Cleaning

Self-Clean Oven (select models)

Note: For manual clean oven, see page 18.

CAUTION

•It is normal for parts of the range to become hot during a self-clean cycle.

•To prevent personal injury and damage to the oven door do not attempt to open door when “LOCK” is displayed.

•Avoid touching cooktop, door, window or oven vent area during a clean cycle.

•Do not use commercial oven cleaners on the oven finish or around any part of the oven. They will damage the finish or parts.

The self-clean cycle uses above-normal cooking temperatures to automatically clean the oven interior. Do not force the oven door or lock lever open. This may result in exposure to high temperatures and be a burn hazard.

It is normal for flare-ups, smoking, or flaming to occur during cleaning if the oven is heavily soiled. It is better to clean the oven regularly rather than to wait until there is a heavy build- up of soil in the oven.

During the cleaning process, the kitchen should be well ventilated to get rid of normal odors associated with cleaning.

Before Self-Cleaning

1.Turn off the oven light before cleaning. The light may burn out during the clean cycle.

2.Remove broiler pan, all pans, and oven racks from the oven. The oven racks will discolor and may not slide easily after a self-clean cycle if they are not removed.

3.Clean oven frame, door frame, area outside of gasket, and around the opening in the door gasket with a nonabrasive cleaner such as Bon Ami* or detergent and water. The

self-cleaning process does not clean these areas. They should be cleaned to prevent soil from baking on during the clean cycle. (The gasket is the seal around the oven door and window).

4.To prevent damage, do not clean or rub the gasket around the oven

door. The gasket is designed to seal in heat during the clean cycle.

5.Wipe up excess grease or spillovers from the oven bottom. This prevents excessive smoking, flare-ups or flaming during the clean cycle.

6.Wipe up sugary and acidic spillovers such as sweet potatoes, tomato, or milk-based sauces. Porcelain enamel is acid-resistant, not acid-proof. The porcelain finish may discolor if acidic spills are not wiped up before a self-clean cycle.

To set Self-Clean:

Note: Oven temperature must be below 400° F to program a clean cycle.

1.Close the oven door.

2.Move door lock lever right to the locked position.

3. Press the Clean pad.

• CLEAN flashes in the display.

If the door is not closed, beeps will sound and “DOOR” will display. If the door is not closed within 45 seconds, the self-cleaning operation will be canceled and the display will return to the time of day.

4. Press the ▲ or ▼ pad.

• CL-M (Medium Soil, 3 hours) is displayed.

5. Press the ▲ or ▼ pad to scroll through the self-cleaning settings.

CL-H (Heavy Soil, 4 hours)

CL-M (Medium soil, 3 hours)

CL-L (Light Soil, 2 hours)

Choosing the soil level of the oven automatically programs the self-cleaning time.

6.After four seconds, the oven will start cleaning.

•The cleaning time will start counting down in the display.

•LOCK will appear in the display.

•CLEAN will appear in the display.

To Delay a Self-Clean Cycle:

1.Press the Delay pad.

•DELAY flashes.

•00:00 will appear in the display.

2.Press the ▲ or ▼ pad to set the amount of

time you want to delay the cycle. Delay time can be set from ten minutes (00:10) to 11 hours, 59 minutes (11:59).

cont.

* Brand names for cleaning products are registered trademarks of the respective manufacturers.

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Electric Range Coil Recognize Safety Symbols, Words, Labels InstructionsTo Prevent Fire or Smoke Damage Case of FireImportant Safety Instructions Child SafetyCooking Safety Utensil SafetySelf-Clean Oven select models Important Safety Notice and WarningCleaning Safety CooktopSetting the Controls Suggested Heat SettingsSurface Controls Coil Element Surface Coil ElementsDrip Bowls To protect drip bowl finishManual Clean Oven Control Using the TouchpadsSetting the Timer Setting the ClockSetting the Controls For Broiling Setting the Controls For Baking or RoastingBaking, Roasting and Broiling Self-Clean Oven Control ClockG H I J To change the clock to 24-hour formatTimer Fault CodesLocking the Controls BakingDelay Bake Cook & HoldBaking Notes Baking Differences Between Your Old and New OvenKeep Warm Keep Warm NotesAdjusting the Oven Temperature Automatic Shut-Off/Sabbath ModeSabbath Mode Notes Broiling Chart BroilingBroil Notes Rack Total Foods PositionOven Vent Oven LightOven Bottom Rack PositionsTo set Self-Clean Before Self-CleaningTo Delay a Self-Clean Cycle During the Self-Clean Cycle After Self-CleaningCleaning Procedures Care & CleaningPart Procedure Is not wiped up, it may discolor the porcelain Select models20000008 Follow with Stainless Steel Magic SprayMaintenance Oven DoorOven Window To protect the oven door windowLeveling Legs Storage DrawerConvenience Outlet Canadian models onlyTroubleshooting Problem SolutionNoises may be heard ServicerOff. This is normal Warranty & Service WarrantyWhat is Not Covered By These Warranties If You Need ServiceCuisinière électrique en éléments spiralés Pour éviter un incendie ou des dommages de fumée Toute Cuisinière Peut Basculer ET Provoquer DES BlessuresAvertissement Pour réduire le Les instructions de sécurité importantes et les paragraphesEn cas d’incendie Sécurité pour les enfantsFamiliarisation avec l’appareil Cuisson et sécuritéUstensiles et sécurité Table de cuissonÉléments spiralés FriteusesNettoyage et sécurité Four autonettoyantAvertissement et avis important pour la sécurité Conserver ces instructions pour consultation ultérieureBoutons de commande Réglage des commandesCuisson sur la surface Suggestions pour le réglageÉléments de la table de cuisson RemarquesÉléments spiralés Cuvettes de récupérationCommandes du four à nettoyage manuel certains modèles Cuisson dans le fourUtilisation des touches Programmation de la minuterieCuisson courante, rôtissage et cuisson au gril Programmation des commandes pour la cuisson au grilChoisir le réglage Hi pour un gril normal Commandes du four à autonettoyage certains modèles HorlogeBC D G H I J Changement de l’horloge à un format de 24 heuresMinuterie Verrouillage des commandesCodes d’anomalie Cuisson courante Cuisson et maintienDifférences de cuisson entre l’ancien four et le nouveau Remarques sur la cuisson courante au fourCuisson courante différée Maintien au chaud Remarques sur la fonction maintien au chaudProgrammation du maintien au chaud Annulation du maintien au chaudRemarques sur le mode sabbat Annulation du mode sabbatArrêt automatique/Mode sabbat Ajustement de la température du fourCuisson au gril Remarques sur la cuisson au grilTableau de cuisson au gril Position Degré DE Temps DE Cuisson AlimentsÉvent du four Éclairage du fourSole du four Positions des grillesNettoyage Avant l’autonettoyageProgrammation de l’autonettoyage Démarrage différé d’un cycle d’autonettoyagePendant le cycle d’autonettoyage Après le cycle d’autonettoyageMéthodes de nettoyage Certains modèles En le vaporisant d’abord sur un linge Risqueraient de rayer le verreGrilles du four Nettoyer avec de l’eau savonneuse SécherEntretien Porte du fourHublot du four Lampe du fourPieds de réglage de l’aplomb Tiroir de remisagePrise de courant auxiliaire DéposeProblème Solution Recherche des pannesFumée lors de la mise en marche Opération d’autonettoyageCodes d’anomalie ’appareil et prendre contact avec un réparateur autoriséGarantie et service après-vente GarantieNe sont pas couverts par ces garanties Si vous avez besoin d’aideEstufa Eléctrica con Elementos Tubulares Fecha de Compra Para Evitar un Incendio o Daño Causado por el HumoEn EE. UU En Canadá En Caso de Incendio Seguridad para los NiñosInstrucciones Generales Seguridad al CocinarCubierta Seguridad sobre el Uso de UtensiliosElementos Tubulares Ollas FreidorasSeguridad en la Limpieza Horno AutolimpianteAviso y Advertencia Importante Sobre Seguridad Conserve estas instrucciones para referencia futuraCocinando en la Estufa Controles SuperioresProgramación de los Controles Ajustes de Calor SugeridosSuperficie de los Elementos Tubulares NotasElementos Tubulares Platillos ProtectoresCocinando en el Horno Controles del Horno de Limpieza ManualUso de las Teclas Programación del TemporizadorAjuste de los Controles para Asar a la Parrilla Horneado, Asado y Asado a la ParrillaMayores tiempos de cocción tales como la carne de ave Controles del Horno Autolimpiante modelos selectos ‘Clock’ RelojPara cambiar el reloj a formato de 24 horas Programación del Reloj‘Timer’ Temporizador Códigos de ErroresBloqueo de los Controles ‘Cook & Hold’ Cocción y ‘Bake’ HorneadoNotas sobre Horneado Mantener Caliente‘Delay Bake’ Horneado Diferido Para cancelar ‘Keep Warm’ Oprima la tecla ‘CANCEL’ Retire el alimento del horno‘Keep Warm’ Mantener Caliente Notas sobre ‘Keep Warm’Ajuste de la Temperatura del Horno Cierre Automático/Modo SabáticoNotas Sobre el Modo Sabático ‘Broiling’ Asar a la Parrilla Notas Sobre Asado a la ParrillaTabla de Asar a la Parrilla Termino DE Tiempo Total DE AlimentosRespiradero del Horno Panel Inferior del HornoParrillas del Horno Posiciones de la ParrillaPara programar ‘Self-Clean’ Autolimpieza Antes de la AutolimpiezaPara diferir un ciclo de autolimpieza Nota Para la limpieza manual, ver páginaDurante el Ciclo de Autolimpieza Después del Ciclo de AutolimpiezaProcedimientos de Limpieza Pieza Procedimiento DE LimpiezaCuidado y Limpieza Mantenimiento Puerta del HornoVentana del Horno Luz del HornoTornillos Niveladores Tomacorriente para Electrodomésticos PequeñosGaveta de Almacenamiento Modelos Canadienses solamenteProblema Solución Localización y Solución de AveríasCódigos de Errores Modelos selectosSe escuchan ruidos Se apagan. Esto es normalGarantía y Servicio GarantíaLo que no cubren estas garantías Si necesita servicio

Coil specifications

Amana Coil is a leading manufacturer of high-quality heating and cooling products, recognized for its innovative technologies and commitment to energy efficiency. One of the key features that distinguishes Amana Coil from its competitors is its advanced coil design, which significantly enhances the performance of the HVAC systems. The coils are constructed using high-grade copper and aluminum materials that not only provide superior thermal conductivity but also ensure longer service life.

One of the notable technologies employed in Amana Coil products is the use of advanced refrigerant technology. The use of eco-friendly refrigerants, such as R-410A, helps reduce the environmental impact while maintaining excellent cooling efficiency. This is especially crucial in today's market, where environmental sustainability is becoming a top priority for both consumers and manufacturers.

Amana Coil products also incorporate multi-stage cooling and heating systems. This technology allows for better temperature control and more consistent comfort levels within the home. By adjusting the output based on current heating or cooling demands, these systems are able to operate more efficiently, leading to lower energy bills. Additionally, the variable-speed fan motors found in many Amana Coil models provide enhanced airflow and reduced noise levels, contributing to a more pleasant indoor environment.

Durability is another critical characteristic of Amana Coil products. The precision-engineered coils are designed to withstand a variety of harsh operating conditions, ensuring longevity and reliability. The units are subject to rigorous testing, which guarantees that they can handle extreme temperatures and moisture levels without compromising performance.

Moreover, Amana Coil offers excellent warranty coverage, often providing a limited lifetime warranty on the compressor and a 10-year parts limited warranty. This reinforces the brand's confidence in its products and offers peace of mind to customers.

In summary, Amana Coil stands out in the HVAC market due to its attention to high-quality materials, energy-efficient technologies, and robust design. By focusing on innovative solutions and sustainable practices, Amana Coil continues to lead the way in providing superior heating and cooling systems that meet the needs of both residential and commercial customers. Buyers looking for reliable, efficient, and eco-friendly HVAC solutions will find Amana Coil a top choice in today's competitive market.
Top Page Image Contents