Southbend STRE-5EZ Location of Connections and Vents, Water Connection, Electrical Connection

Page 15

STRATOSTEAM COUNTERTOP STEAMER

INSTALLATION

Figure 6

Location of Connections and Vents

STEP 3: WATER CONNECTION

NOTICE

To meet warranty requirements, the supply water must meet the following specifications:

Pressure

30 to 60 PSI (205 to 410 kPa)

Total Dissolved Solids (TDS)

60 PPM or less

Hardness

2 grains (35 PPM) or less

pH

7.0 to 7.5

STEP 4: ELECTRICAL CONNECTION

The electric connection is made to the contactor, which is located inside the service compartment on the right side of the steamer. The right side panel must be removed to gain access to the contactor. A hole on the rear of each steamer is provided for a 3/4" conduit fitting (solid or flex). An electric cable support bracket and clamp are located inside of the service compartment, to the right and above the contactor (see Figure 7).

Be sure that the input voltage and number of phases matches the requirement stated on the serial plate. The steamer is factory wired per customer order. A wiring diagram is attached to the inside of the right side panel of the steamer.

WARNING

A POSITIVE GROUND CONNECTION IS ESSENTIAL. DO NOT ALLOW ANY TAMPERING OR ADJUSTMENT OF ANY CONTROL OR WIRING. THE STEAMER IS FACTORY SET. ADJUSTING ANY INTERNAL COMPONENT CAN VOID THE WARRANTY.

THIS STEAMER REQUIRES A KIT TO BE FIELD CONVERTED FROM THREE-PHASE TO SINGLE-PHASE OR VICE-VERSA. CONSULT FACTORY FOR PHASE CHANGES.

OWNER’S MANUAL 1185184

PAGE 15 OF 44

Page 14 Page 16
Image 15
Page 14 Page 16
Contents StratoSteam Safety Precautions Location of Serial Plates IntroductionSpecifications DimensionsClearances Dimensions Electrical Requirements Water RequirementsDrain Requirements Operation OperationLocation of Water Trough StartupShutdown Troubleshooting by OperatorCooking Tips ControlsSuggested Cooking Times STAINLESS-STEEL Surfaces Cleaning & MaintenanceDaily Cleaning and Maintenance Periodic DE-LIMING AS NeededCleaning & Maintenance Stratosteam Countertop Steamer Unpacking InstallationStacking TWO Steamers Attach Legs and BracketsAttach Legs and Brackets Mounting on Cabinet BaseLocation of Connections and Vents Water ConnectionElectrical Connection Electrical Connection Check the Installation SHUT-DOWN and WIPE-CLEAN SteamerCheck Steamer Operation Troubleshooting FLOWCHARTS, PROCEDURES, and Wiring Diagrams ServiceHOW the Steamer Operates How the Steamer Operates Disconnect Power AT Circuit Breaker Steamer Not Heating Up, Power Light Is Not LitCheck water-level control sensor see Replace water solenoid Buzzer Does Not Come On When Timer Runs Out Heating Cartridge Check at Contactor Disconnect Power AT Circuit BreakerPower Switch Check Contactor Check Timer and Buzzer Check Door Switch Check High-Limit Thermostats Check Water-Level-Control Sensor Check Water Solenoid Check Wiring Diagram for 208/220/240 Volt Models Wiring Diagram for 480 Volt Models Parts Parts Diagram3EZ 5EZ Structural PartsSee parts list on previous Door Assembly Parts Door Switch Parts Control Panel Parts Heating Cartridges, Thermostats, and Contactor Parts Water Train Parts Water-Train PartsCabinet Base Parts Cabinet-Base Parts StratoSteam Countertop Steamer Models STRE-3EZ and STRE-5EZ

STRE-5EZ, STRE-3EZ specifications

The Southbend STRE-3EZ and STRE-5EZ are two highly regarded models in the line of restaurant-grade ranges, offering chefs the reliability and performance required in commercial kitchen environments. Both models are designed with a focus on durability, efficiency, and functionality to meet the demanding needs of culinary professionals.

One of the standout features of the STRE-3EZ and STRE-5EZ is their robust construction. Built with durable stainless steel exteriors, these ranges are designed to withstand the rigors of a busy kitchen while maintaining a sleek appearance. Their heavy-duty, cast iron grates provide excellent heat retention and distribution, allowing for quick and even cooking, which is essential in preparing high-quality dishes.

The STRE-3EZ features three open burners, while the STRE-5EZ is equipped with five, offering greater cooking capacity for larger volume operations. Each burner is capable of delivering high BTU output, providing intense heat for frying, boiling, or sautéing. The infinite adjustment settings allow chefs to easily control the temperature, ensuring precise cooking results every time.

Both models come with a spacious oven, featuring an easy-to-clean porcelain enamel finish. The ovens are designed to accommodate standard full-size sheet pans, making them ideal for baking, roasting, and other cooking methods. The STRE-5EZ has a larger oven capacity, catering to establishments with higher production needs.

Another innovative feature is the inclusion of electronic ignition systems, which enhance safety and ease of use. This technology ensures that burners ignite quickly and reliably, reducing the risk of gas leaks and improving overall energy efficiency.

In terms of maintenance, both the STRE-3EZ and STRE-5EZ are designed for easy access to component parts, simplifying cleaning and repair processes. Additionally, their heavy-duty construction minimizes wear and tear, resulting in a longer lifespan, which is a critical consideration for restaurants looking to invest in reliable kitchen equipment.

With their combination of powerful performance, quality construction, and user-friendly design, the Southbend STRE-3EZ and STRE-5EZ are excellent choices for any commercial kitchen seeking efficient and effective cooking solutions. Whether for a small café or a large-scale restaurant, these ranges embody the standards that modern culinary environments demand.
Top Page Image Contents