Southbend SB-5-ES Maintenance and Cleaning Guide, Equipment Installation, Application and Usage

Page 15

OVEN / SMOKER

PARTS

MAINTENANCE AND CLEANING GUIDE

Southbend equipment is designed to last for years of useful service. Careful consideration is

given in selecting components for durability, performance and ease of maintenance. For example, the Smoker Motor has sealed bearings and never needs to be lubricated. While

Southbend equipment is designed for minimum care and maintenance certain steps are required by the user for maximum life and effectiveness:

•Proper installation of the equipment.

•Correct application and usage of the equipment. •Dry-out Procedures performed daily. •Thorough cleaning on a regular basis.

EQUIPMENT INSTALLATION:

A. Install the Southbend SB-5-ES or SB-10-ES Smoker with adequate clearance around the unit. This is important for cleaning and maintenance, as well as providing cooling air for the Motor and Controls.

B. The installation must be on a level floor to prevent the Door or Doors from swinging when left in an open position.

C. The SB-5-ES or SB-10-ES Smoker must be connected to the proper power supply as indicated on the equipment label.

D. The SB-5-ES or SB-10-ES Smoker must be connected to an approved potable water supply in accordance with all applicable plumbing codes for your area.

APPLICATION AND USAGE:

The SB-5-ES and SB-10-ES Smokers are designed for the low to medium temperatures normally found in smoking and/or slow-cooking operations. THEY ARE NOT DESIGNED TO OPERATE AT HIGH TEMPERATURES FOR LONG PERIODS OF TIME!!! Continuous operation at maximum temperatures and/or humidity settings may result in premature component failure.

SMOKER DRY–OUT PROCEDURE:

A. Remove the GREASE PAN. Empty and clean the PAN and set it aside.

B. WIPE UP ANY STANDING LIQUIDS IN THE SMOKER BOTTOM. C. For Manual Control units:

Set the POWER switch to the ON position. Set the COOK control to 150°F and the HOLD control to OFF. Set the 24–HOUR TIMER to 2 hours so that the COOK control operates.

For Programmable Control units:

INSTALLATION & OPERATIONS MANUAL 1189200 REV 0 (12/06)

PAGE 15 OF 24

Image 15
Contents Oven Smoker Safety Precautions Specifications IntroductionClearances Southbend OVEN/SMOKER Shipment Availability for TestingComparison with Other Units ConstructionReceipt and Installation InstallationReceipt Electrical Connections Water Supply Connection Oven / Smoker Initial START-UP Manual Controls Initial START-UPShould NOW be Ready for Full Operations Operating Instructions Operating Instructions Manual Controls Application and Usage Maintenance and Cleaning GuideEquipment Installation Smoker DRY-OUT ProcedureCleaning Oven / Smoker Parts Replacement Parts List Electrical ComponentsInterior Components Exterior Components Control ComponentsInstallation & Operations Manual 1189200 REV 0 12/06 Oven / Smoker Schematics Installation & Operations Manual 1189200 REV 0 12/06 Oven / Smoker Schematics SB-5-ES / SB-10-ES

SB-5-ES, SB-10-ES specifications

The Southbend SB-10-ES and SB-5-ES are two of the standout models in Southbend's esteemed lineup of commercial ranges designed for kitchens that prioritize both functionality and efficiency. These ranges are built for chefs and culinary professionals who require reliable equipment that can handle the rigors of daily use.

The SB-10-ES features ten burners, each designed to deliver high BTU output, ensuring rapid heating and exceptional cooking performance. A hallmark of Southbend products is their focus on energy efficiency, and the SB-10-ES incorporates advanced burner technology that maximizes heat retention while minimizing gas consumption. The heavy-duty cast iron grates not only provide excellent heat transfer but also support various cookware sizes, making them versatile for numerous cooking tasks.

On the other hand, the SB-5-ES is a more compact option, featuring five burners. It is ideal for kitchens where space is at a premium but still offers all the quality and durability that Southbend is known for. Like the SB-10-ES, the SB-5-ES also uses high-output burners that allow for quick and efficient cooking, making it an excellent choice for smaller operations or satellite kitchens.

Both models are equipped with robust stainless-steel construction, which enhances their durability and makes them easy to clean. The seamless design also helps to prevent the accumulation of grease and food particles, ensuring a sanitary cooking environment.

A standout characteristic of the SB-10-ES and SB-5-ES is their intuitive control system. Each burner features a separate control knob that allows precise temperature adjustments, giving chefs the flexibility to manage multiple dishes concurrently. This is especially important in high-pressure cooking environments where timing and temperature control are critical.

An additional feature of both models is the stainless steel backguard, designed to protect walls from heat and splatter while providing an aesthetically pleasing look. The integrated oven options available with these ranges allow for easy baking and roasting, catering to a variety of culinary needs.

In summary, whether you choose the Southbend SB-10-ES with its ten burners or the more compact SB-5-ES, you are investing in quality equipment that embodies innovation, efficiency, and durability—traits that have solidified Southbend’s reputation in the commercial kitchen industry. These models are well-suited for both aspiring chefs and seasoned professionals looking to enhance their cooking experience.