Sharp R-1900M operation manual Saving Memories

ProcedureDisplay

5 Press the MANUAL/
REPEAT pad and enter
desired multiplication		DEF.
for A2 at Stage 2.
(Ex: Enter 1, 5 for 0.15.)	1
			DEF.
	5
		DEF.
6 Press the MANUAL/
REPEAT pad and enter
desired time for B2 at			DEF.
Stage 2.
(Ex: Press 2 for	2
20 seconds.)			DEF.
7 Press the POWER LEVEL
pad and enter desired
power level for PL2 at			DEF.
Stage 2.
(Ex: Enter 2 for 20%)	2
			DEF.
8 Press the MANUAL/
REPEAT pad and enter
the pause timing.			DEF.
(Ex: Enter 7 for when 70%
of total defrosting time	7
has passed.)			DEF.
9 Press the POWER LEVEL
pad and enter desired
power level for PL3 at			DEF.
Stage 3.
(Ex: Enter 1 for 10%)	1
			DEF.

Saving Memories

*Memory 0 - 9 are programmed as factory settings. See the table of Programmed Memories on page 7.

*Memories must be programmed before memory cooking can be used.

Memory banks

Dual Digit: Memory 0-99

Single Digit: Memory 0-9

Repeat Digit Input: Memory 0-29

Max. cooking stages: 4 stages

Setting time and power level for Single Stage

<Single Digit Input>

*Suppose you want to set 1 minute at 70% with memory 2.

ProcedureDisplay

X 2

NO.

1Press the SET MEMORY pad twice within 2 seconds.

		2
2	Enter memory number.		NO.
3	Press the MANUAL/REPEAT pad.

10 Press the START pad.

11 Press the STOP/CLEAR pad to exit from the Custom Setting Function.

NOTES:

1.See the table for Microwave Power Level on page 9 and The Pause Timing on page 16.

2.You can enter minus numbers for B1 and B2 at steps 3 and 6.

In that case,

press the MANUAL/REPEAT pad twice at step 3 or 6

( is displayed.) and enter desired time for or B1

and B2 at Stage 1 and 2.

Press the MANUAL/REPEAT pad again to enter positive

numbers. ( is displayed.)

1 0 0

4Enter cooking time.

5Press the POWER LEVEL pad.

7

6 Enter power level.

7 Press the SET MEMORY pad to save memory.

NO.

8 Press the STOP/CLEAR pad to exit.

17