*Suppose you want to set Programme Lock ON.
Procedure
1Press the Custom Setting pad
x 2 twice within 2 seconds.
| 3 |
| 2 | 2 | Enter 3, 2 for Programme Lock |
|
|
| ON. | ||
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| 3 | Press the START pad to save the |
|
|
|
|
| setting. |
4 Press the STOP/CLEAR pad to exit from the Custom Setting Function.
NOTE : If you select Programme Lock OFF, the LOCK indicator in the display will disappear when you press the START pad.
Operation when Programme Lock ON is set
KEY | Custom Setting Title | When Programme | |
Operation | Lock ON is set | ||
| |||
|
|
| |
1 | Selecting Memory | no operation | |
Input Method |
| ||
|
| ||
|
|
| |
2 | Selecting Auto Start | no operation | |
Operation |
| ||
|
| ||
|
|
| |
3 | Programme Lock | operation | |
Setting |
| ||
|
| ||
|
|
| |
4 | Audible Signal Sound | no operation | |
Volume Setting |
| ||
|
| ||
|
|
| |
5 | Cooking Completion | no operation | |
Signal Setting |
| ||
|
| ||
|
|
| |
6 | Memory Check | operation | |
|
|
| |
| Counter Check/Clear | check : operation | |
7 |
| clear : | |
|
| no operation | |
|
|
| |
| Air Intake Filter | check, clear : | |
8 | Counter | operation | |
|
| set : no operation | |
|
|
| |
| Selecting Operation | no operation | |
9 | in case of Magnetron |
| |
| Failure |
| |
|
|
| |
| Multiplication Factors | check : operation | |
x2/x3 | for Double/Triple | set : no operation | |
| Quantity |
| |
|
|
| |
EXPRESS | Express Defrost | check : operation | |
DEFROST | Setting | set : no operation | |
|
|
|
4. Audible Signal Sound Volume Setting
The volume of the audible signal can be adjusted to High, Medium, or Mute.
CU41 : High = Factory Setting
CU42 : Medium
CU43 : Mute
To set cooking completion signal volume
Press the CUSTOM SETTING pad twice within 2 seconds then enter the numbers
4, 1 for High
4, 2 for Medium 4, 3 for Mute
Press the START pad to save setting and the STOP/CLEAR pad to exit from the Custom Setting Function.
NOTE : Even when errors occur, your oven will not beep in mute setting.
5. Cooking Completion Signal Setting
There is a choice of 4 different signals on your oven. CU51 : 1 long beep = Factory setting
CU52 : Repeating long beeps
CU53 : 4 short beeps
CU54 : Repeating short beeps
To set the signal type
Press the CUSTOM SETTING pad twice within 2 seconds then enter the numbers
5, 1 for 1 long beep
5, 2 for repeating long beeps 5, 3 for 4 short beeps
5, 4 for repeating short beeps
Press the START pad to save settings and the STOP/CLEAR pad to exit from the Custom Setting Function.
6. Memory Check
Use this setting to check the programming for a certain memory.
*Suppose you want to know the information programmed into memory 1, programmed for 4 minutes at 60% for the 1st stage and 2 minutes at 30% at the 2nd stage programmed Dual Digit Input.
ProcedureDisplay
x 2 6
1 Press the CUSTOM SETTING | NO. CHECK |
| |
pad twice within 2 seconds and |
|
enter 6. |
|
12