Xantrex Technology 815-3012, 815-3024 manual Freedom SW Device Setup Screen Operating States Modes

Page 41

Freedom SW 3K2K InvChg Owners Guide.book Page 27 Wednesday, October 9, 2013 1:34 PM

Operating the Freedom SW with the SCP

Table 4 Freedom SW Device Setup Screen Operating States (Modes)

State (Mode)

Displayed When...

 

 

Invert

The Freedom SW is supplying power to loads by inverting power

 

from the batteries. AC input from the utility or generator is absent or

 

out of nominal range.

 

 

Qualifying AC

The Freedom SW is determining if AC input is within a usable

 

voltage and frequency range. Qualifying AC is also displayed

 

when the Freedom SW is awaiting application of AC power or a

 

command to enable invert mode.

 

 

Charging

The Freedom SW is charging the batteries from qualified AC input

 

from the utility grid or a generator. The charge state is in transition

 

to either bulk, absorption, float, or equalize. AC input is also passed

 

through to the load while charging.

 

 

Bulk

The Freedom SW is bulk charging the batteries from qualified AC

 

input from the utility grid or a generator. AC input is also passed

 

through to the load while bulk charging.

 

 

Absorption

The Freedom SW is absorption charging the batteries from qualified

 

AC input from the utility grid or a generator. AC input is also passed

 

through to the load while absorption charging.

 

 

ABS Finish

One Freedom SW unit has completed the absorption stage and is

 

waiting for other Freedom SWs in the system to complete

 

absorption. This status can occur only when there is another

 

Freedom SW also charging the battery.

 

 

Float

The Freedom SW is float charging the batteries from qualified AC

 

input from the utility grid or a generator. The Freedom SW is set for

 

three-stage charging. AC input is also passed through to the load

 

while float charging.

 

 

Fault

The Freedom SW has an active fault. The Fault/Warning light on the

 

Xanbus SCP is on.

 

 

State (Mode)

Displayed When...

 

 

Gen Support

There is AC input from the generator, and the Freedom SW is

 

supporting the generator by supplying additional power to the

 

critical loads. See “Gen Support” on page 53.

 

 

Search

Search mode is enabled and the Freedom SW is standing by, waiting

 

to begin inverting. See “Changing Configurable Settings From The

 

Device Setup Menu Screen” on page 32.

 

 

Passthru

The AC connected to the AC1 or AC2 input is passing directly

 

through the Freedom SW to the loads. The batteries are not being

 

charged in this state.

 

 

Equalize

Equalization has been turned on and the Freedom SW is equalizing

 

the batteries after completing a full charge cycle.

 

 

 

 

97-0019-01-01

27

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Model Numbers Sine Wave Inverter/ChargersPage Document Part Number Exclusion for DocumentationDate and Revision Product NumbersPurpose About This GuideScope AudienceRelated Information Reference Important Safety InstructionsFire and Burn Hazard Precautions When Working With Batteries Regulatory Precautions When Preparing to ChargeViii FCC Information to the UserContents Page Page Page Materials List IntroductionKey Features Explained Key FeaturesSeries Stacking StackingParallel Stacking Generator Assist Stack ChargingBasic Protection Features Xanbus System System ComponentsSystem Components Product/Accessory Not Shown Product Number/sProduct/Accessory Shown above Product Number/s Compartment Side Cooling Fans Front Panel Controls Status LEDsIsometric View of the Front Panel and Fans Freedom SW Front and Side PanelsFreedom SW Start Up Behavior Freedom Inverter/Charger OperationFront Panel Lights Inverter Operation Using the Front PanelTo operate in invert mode from the front panel Operating Limits for Inverter Operation Operating Limits for Charger Operation Operating the Freedom SW with the SCP 10 9 8 Using the Xanbus SCPSystem Control Panel Enter button Func button9 Down and Up arrow buttons Viewing the SCP Home Screens SCP NavigationStartup Screen To display the Select Device menu To display the Setup menu for a deviceSoft Keys Soft Key NavigationFreedom SW System Status Screen Soft Key Navigation To view the firmware revision number Viewing the Firmware Revision NumberTo view the F/W Rev. from the System Status screen Using the STBY/ON Fault Clear Button Setting the Time and DateSystem Status Screen Reading the System Status ScreenTo view the Freedom SW Setup menu screen Reading the Freedom SW Device Setup ScreenLine Label FSW3012 00 Setup Device Setup Screen Status InformationButton Pressed SimultaneouslyFreedom SW Device Setup Screen Operating States Modes Configuring the Freedom SW using the SCP SCP System Menu Map System Menu MapViewing the Select Device Menu Viewing the System Status ScreenSelecting the Freedom SW from the Select Device Menu Device Setup Menu ScreenFreedom SW Device Setup Menu Selecting and Changing a Configurable Setting To select and change a configurable settingConfigurable Settings Using Search ModeConfiguring the Freedom SW using the SCP To start equalizing the batteries, do one of the following Equalization ProcedureTo select the Basic Settings menu screen Changing Freedom SW Basic Settings915W Basic Settings Setting Defaults and RangesExamples CalculationsChanging Freedom SW Advanced Settings Advanced Settings is highlighted Freedom SW Owner’s Guide To select the Advanced Settings menu screenSelecting Advanced Settings From the Device Setup Screen Appears only when Equalize support is Enabled Menu Map of the Freedom SW Advanced Settings Inverter Settings Description Inverter Settings MenuUsing the Low Battery Cut Out Lbco Delay SettingsConfiguring the Freedom SW using the SCP Search DelayCharger Settings Menu Charger Settings Menu Description Battery Charger FunctionsSettings menu Custom Battery Settings MenuCustom Battery Settings Menu Description ACIn Settings Menu Description ACIn SettingsAC1 Lo Volt FreqGen Support GenSup ModeGEN Support Menu Description and Valuesa GenSup AmpsStacking Menu Description and Values a Stacking Configuration MenuTo customize the Freedom SW name Setting the Device NameTo set the Freedom SW device number Setting the Device NumberIf Basic Settings appears instead of Advanced Settings on Using the Advanced Features Resetting the Freedom SW to Default SettingsTo restore Freedom SW default settings Restore Defaults command, press EnterBattery Types Battery Charging ReferenceCharge Algorithm Stages Three-Stage chargingBulk Stage Three-Stage Battery Charging CycleFloat Stage Absorption StageTwo-Stage Charging Cycle Two-Stage Charging ProcessBattery Charging Reference Equalize Charging Equalize ChargingBattery Charging Reference General Troubleshooting Guidelines TroubleshootingInverter Applications Problem LoadsResistive Loads Motor LoadsFault Types And Behaviors Fault TypesFault type Behavior Faults Types and Behaviors Troubleshooting the Freedom SW via the SCPFault Types To view a warning list To view a fault listAC Output under Fault MessagesVoltage AC Output overTemperature F44 Battery OverF47 DC Under Voltage ImmediateF49 DC Over Voltage FaultF48 DC Under Voltage F58 FET2 Over Temperature F57 FET1 Over TemperatureF63 Power Board Temp UnreadableF64 AC overload Temperature F69 External Sync FailedF68 Transformer Over F70 Unique Dev# NeededF75 Master Inverter Lost F85 PowerBoard OverW69 AGS not connected GenSup Mode settingW48 DC under voltage Physical Specifications SpecificationsInverter Specifications Freedom SW Charger SpecificationsRegulatory Approvals All ModelsPage 97-0019-01-01 Schneider Electric SolarInverters USA Inc

815-2024, 815-2012, 815-3012, 815-3024 specifications

Xantrex Technology is a leading manufacturer of advanced power electronics, providing high-quality inverter solutions that cater to diverse applications. Among its impressive portfolio, the Xantrex models 815-3024, 815-3012, 815-2012, and 815-2024 stand out for their reliability and innovative features.

The Xantrex 815-3024 is a robust 3000W inverter designed for 24V systems. Its key feature is the True Sine Wave output, which delivers clean and stable power, making it suitable for sensitive electronics and appliances. It also incorporates an advanced inverter technology that optimizes efficiency and performance. Its compact design allows for easy installation in various setups, such as RVs, boats, and off-grid systems.

Similarly, the Xantrex 815-3012 model caters to 12V applications and offers a continuous output power of 3000W. This inverter excels at providing high surge capability, helping to start up demanding loads such as refrigerators and power tools. The 815-3012 also features an LCD display, which provides real-time data on power consumption, battery voltage, and inverter status, enhancing user experience and enabling proactive management of power usage.

The Xantrex 815-2012 is a 2000W inverter specifically designed for 12V systems. It shares many technological advancements with its higher-powered counterparts, including the True Sine Wave output. This makes it an ideal choice for users seeking a reliable and efficient power source for smaller loads. Additionally, the model includes built-in protection features such as overload, short circuit, and over-temperature safety measures, ensuring longevity and safe operation.

Lastly, the Xantrex 815-2024 offers similar capabilities but is tailored for 24V systems with a power output of 2000W. It is well-suited for applications where moderate power demand exists, such as solar setups and battery-based power solutions. Its compact form factor and lightweight design make it particularly appealing for mobile and temporary installations.

All of these models feature technologies that promote energy efficiency, including automatic low voltage shutdown and smart cooling systems. They boast protective features that ensure the safety and durability of the devices connected to them. With their blend of advanced technologies, reliable performance, and user-friendly interfaces, Xantrex’s 815 Series inverters provide an excellent solution for anyone in need of dependable power conversion.
Top Page Image Contents