Avery 7112 HF user manual General Description, Auto Switch

Page 11

General Description

Main Switch

This turns the machine on and off.

Auto Switch

Turning this switch to the "on" position will activate the feed system, transporting a label from the hopper to underneath the electrode, ready for sealing.

Vacuum On Off Switch

Turn the vacuum generator on and off

Load Push Button Switch

Load a label from the hopper via vacuum to the feed arm vacuum block.

Feed Push Button Switch

Feed the label from the hopper position to the upper platen position for the sealing cycle.

Air Pressure Gauge / Regulator

Adjustment of air pressure is accomplished by turning the knob under the air pressure gauge. To raise the pressure, turn the knob clockwise; to lower, turn it counter-clockwise. When lowering the pressure, allow the needle on the gauge to drop below the desired pressure, and then raise it back to that pressure. The reason for this is that there is a lag when bleeding air out of the system.

Heat Controls

Electrode and plate head can be set independently. The correct temperature will be indicated on the control's face. If the control fails to reach this, refer to the heat control pages provided.

Users Manual Electro-Sealer 7112 HF

General Description • 7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Electro-Sealer 7112 HF This page left blank intentionally Contents Pneumatic Drawings Parts Warranty InformationLimited Warranty ServiceRead ALL Instructions Carefully Safety InstructionsModel 7112 Hopper Feed Heat Sealer Unit Specification To Change Time Settings InstallationLCD General Description Auto SwitchBasic Sealing Leveling the Press Operation Setting the ControlsOperation Security Level Selection Password TableSeries Hopper Feed Regular MaintenanceSymptoms Probable Cause Corrective Action Trouble ShootingSymptoms Probable Cause Corrective Action Symptoms Probable Cause Corrective Action Sealing ProblemsElectrical Drawings TB-3 Electrical Schematic Part7112 HF Hand SW R/H Yellow Brown Black Blue Hand SW L/H TOP Platen Bottom Platen Heater 300 Watt Pneumatic Drawings 70205326 Pneumatic SchematicPage Assembly Drawings Front Panel Assembly Drawing and Cover Front Panel Parts List Frame and Cover Assembly Drawing Frame and Cover Parts List Main Cylinder & Cabinet Assembly Drawing Main Cylinder & Cabinet Parts List Main Cylinder / Platen Assembly Drawing Main Cylinder / Platen Parts List Swing Arm & Base Plate Assembly Drawing Swing Arm & Base Plate Parts List Manifold Assembly Drawing Manifold Parts List Vacuum & Regulator Assembly Drawing Vacuum & Regulator Parts List Hopper Feed Assembly Drawing Hopper Feed Parts List 11 12 8 Bracket, Hopper side rail, RH
Top Page Image Contents