Avery 7112 HF user manual Safety Instructions, Read ALL Instructions Carefully

Page 6

Safety Instructions

Warning

When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions can result in severe personal injury.

READ ALL INSTRUCTIONS CAREFULLY!

The importance of using safe operating procedures cannot be over emphasized. The following guidelines will assist you in safe operations.

1.Read all warning labels and heed their instructions during installation and operation.

2.Use proper line voltage (110 VAC) and air pressure (80 / PSI air pressure) as outlined.

3.Keep hands clear of pinch points during operation and do not touch any of the heated plates while loading or unloading garments.

4.Do not remove any guards. Guards must be in place during operation.

5.Use only an authorized person to service machine and be sure all power sources (Air and electrical) are disconnected during service.

6.Do not attempt to circumvent safety features.

Adherence to these instructions will prevent injury to personnel and with care and normal maintenance the equipment will provide many years of service.

2 Safety Instructions

Users Manual Electro-Sealer 7112 HF

Image 6
Contents Electro-Sealer 7112 HF This page left blank intentionally Contents Pneumatic Drawings Service Warranty InformationLimited Warranty PartsSafety Instructions Read ALL Instructions CarefullyModel 7112 Hopper Feed Heat Sealer Unit Specification Installation To Change Time SettingsLCD Auto Switch General DescriptionBasic Sealing Leveling the Press Setting the Controls OperationOperation Password Table Security Level SelectionRegular Maintenance Series Hopper FeedTrouble Shooting Symptoms Probable Cause Corrective ActionSymptoms Probable Cause Corrective Action Sealing Problems Symptoms Probable Cause Corrective ActionElectrical Drawings Electrical Schematic Part TB-37112 HF Hand SW R/H Yellow Brown Black Blue Hand SW L/H TOP Platen Bottom Platen Heater 300 Watt Pneumatic Drawings Pneumatic Schematic 70205326Page Assembly Drawings Front Panel Assembly Drawing and Cover Front Panel Parts List Frame and Cover Assembly Drawing Frame and Cover Parts List Main Cylinder & Cabinet Assembly Drawing Main Cylinder & Cabinet Parts List Main Cylinder / Platen Assembly Drawing Main Cylinder / Platen Parts List Swing Arm & Base Plate Assembly Drawing Swing Arm & Base Plate Parts List Manifold Assembly Drawing Manifold Parts List Vacuum & Regulator Assembly Drawing Vacuum & Regulator Parts List Hopper Feed Assembly Drawing Hopper Feed Parts List 11 12 8 Bracket, Hopper side rail, RH