Avery 7112 HF user manual Leveling the Press

Page 13

Leveling the Press

1.With the heat on, set the dwell timer for one (1) second or less; put a light colored cloth or paper on the base plate (bottom platen); then, put a piece of carbon paper, carbon side down. Run the machine trough a cycle. The carbon paper will leave a picture of sealing area on the cloth or paper. THE COLOR SHOULD BE EVEN. A dark area indicates more pressure in that area and should be corrected.

2.If the out of level condition is in either the front or back, the base plate can be tilted.

3.Loosen the bolt to lower front and raise the back.

4.Tighten to raise the front, lower the back (see fig below)

3/8-16 X 2 1/4 CAP SCREW

Users Manual Electro-Sealer 7112 HF

General Description 9

Image 13
Contents Electro-Sealer 7112 HF This page left blank intentionally Contents Pneumatic Drawings Limited Warranty Warranty InformationService PartsRead ALL Instructions Carefully Safety InstructionsModel 7112 Hopper Feed Heat Sealer Unit Specification To Change Time Settings InstallationLCD General Description Auto SwitchBasic Sealing Leveling the Press Operation Setting the ControlsOperation Security Level Selection Password TableSeries Hopper Feed Regular MaintenanceSymptoms Probable Cause Corrective Action Trouble ShootingSymptoms Probable Cause Corrective Action Symptoms Probable Cause Corrective Action Sealing ProblemsElectrical Drawings TB-3 Electrical Schematic Part7112 HF Hand SW R/H Yellow Brown Black Blue Hand SW L/H TOP Platen Bottom Platen Heater 300 Watt Pneumatic Drawings 70205326 Pneumatic SchematicPage Assembly Drawings Front Panel Assembly Drawing and Cover Front Panel Parts List Frame and Cover Assembly Drawing Frame and Cover Parts List Main Cylinder & Cabinet Assembly Drawing Main Cylinder & Cabinet Parts List Main Cylinder / Platen Assembly Drawing Main Cylinder / Platen Parts List Swing Arm & Base Plate Assembly Drawing Swing Arm & Base Plate Parts List Manifold Assembly Drawing Manifold Parts List Vacuum & Regulator Assembly Drawing Vacuum & Regulator Parts List Hopper Feed Assembly Drawing Hopper Feed Parts List 11 12 8 Bracket, Hopper side rail, RH