Motion Computing Setting up the Motion C5, Tablet PC Tutorials, To calibrate the digitizer

Setting up the Motion C5

The C5 is self-contained, so you can start using it immediately. If you are using a

C5 Docking Station, refer to the instructions that came with the docking station. You should connect AC power until the battery is fully charged. Use the following steps to get started.

For safety information, see the Safety and Regulatory Guide packaged with the C5.

Step 1: Plug in the power adapter

•Plug the power cord in to the power adapter. Insert the power cord into an outlet and the power adapter plug into the power adapter port on the C5

Power cord Power adapter

Step 2: Turn on the Motion C5

•Press the power button.

As the Motion C5 starts, the light on the power button comes on.

The first time Windows starts, the Windows XP Tablet PC Edition 2005 Tutorials appear. If you do not want this screen to appear every time you start the computer, select Do not show me this again. To run the tutorials later, select Start > All Programs > Tablet PC >

Tablet PC Tutorials.

Step 3: Calibrate the digitizer

With the Motion C5, you will frequently use a pen instead of a mouse and keyboard to interact with the computer. Use the pen to move the pointer around the screen, and tap the screen to click. Use Tablet PC Input Panel (page 20) to enter text.

The digitizer detects the position of the pen. You should calibrate the digitizer the first time you start the C5, and again whenever the pointer does not align with the pen tip.

To calibrate the digitizer

1.Press the Dashboard button () to start Motion Dashboard.

You can use Motion Dashboard to configure the Motion C5 and to start commonly used applications. See “Using Motion Dashboard” on page 18.

2.Under Pen, tap Calibrate Digitizer.

3.Follow the instructions in the calibration program.

Note: If you are left-handed, see “How do I adjust the C5 for left-handed use?” on page 62.

Chapter 1 Getting Started 5