Operation
Location of Controls
Water reservoir
Brewing Indicator light
Filter basket
Base hotplate
UK
Upper hotplate
Basket tabs
Upper hotplate power switch
Brewing power switch
Jug
Before Using for the First Time
BUFFALO recommend that the appliance is cleaned out before using for the first time, or if the appliance has been sat unused for an extended period of time.
1.Fill the water reservoir with cold water.
Note: Use the Jar to fill the reservoir to ensure the maximum capacity of the jar is not exceeded. The maximum amount of water the reservoir can contain is 2.2 litres.
2.Slide the empty filter basket into position between the two basket tabs.
3.Place the jug on the base hotplate beneath the basket.
4.Turn the Brewing power switch On . The Brewing Indicator lights up and hot water will begin to fill the jug.
Note: During operation, steam may rise from the appliance and loud bubbling noises may be heard. This is perfectly normal.
5.Once finished the Brewing Indicator light will switch off. Discard the hot water in the jug.
WARNING: The glass jug becomes hot during operation. Always pick up the jug by the handle to avoid injury.
6.Repeat steps
2