Jack Lananne's Power Juicer PPJJEE VV22 Troubleshooting, Problem Possible Reasons and Solution

Page 5

TROUBLESHOOTING

Problem

 

Possible Reasons and Solution

The motor does not

Check to see if unit is plugged in.

run after being

Locking bar is not locked in place properly.

switched on.

Check if all parts are assembled properly.

 

 

Check if there is any residue left between blade and receptacle.

 

Make sure pulp collector is properly assembled as the safety

 

 

MicroSwitch will cause the unit not to operate if pulp collector

 

 

is not in place.

 

Check filter/blade is secured firmly in place.

 

 

 

The motor is running

Check that all parts are assembled properly and in the

with loud noise and

 

correct position.

shaking.

Juicing overripe fruit may result in too much pulp and will

 

 

clog the filter. Turn machine off and clean the filter.

 

 

 

The motor overheats

The motor needs to warm up for 10 seconds before use.

causing the power to

The fruits and vegetables may be soft or overripe.

automatically shut off.

There may be too much pulp in the filter. Turn machine off

 

 

 

and clean the filter.

 

Motor stops running due to the built-in feature, the overheat

 

 

safety control.

 

 

 

Juice splashes from the

This is normal.

rim of the receptacle.

 

 

 

 

 

Machine is running, but

Check spout to make sure it is the down position. The juice

no juice is coming out.

 

will not come out if spout is in the upright position.

 

 

 

10

Image 5
Contents We are available at Operating Manual Table of Contents Call Problem Possible Reasons and Solution TroubleshootingRead These Safeguards Carefully Before Using this Product Important SafeguardsHelpful Hints To Clean Juice Spout Cleaning Your Power Juicer ExpressLip Pulp Collector Base DisassemblyMain Unit Parts ListAssemble as shown AssemblyAssemblycont