Jura Capresso IMPRESSA XS90, 95 manual Emptying the coffee grounds, Emptying the drip tray

Page 22

If this information is displayed, the machine will no longer make coffee. Refill water as described in Chapter 2.3.

 SELECT PRODUCT

The water tank should be rinsed out and filled with fresh water daily. Always use fresh, cold water. Never fill the water tank with milk, mineral water or other liquids.

15.2 Emptying the coffee grounds

 EMPTY GROUNDS

If this information is displayed, the machine will no longer make coffee. However, the machine will still dispense hot water and steam. Empty the coffee grounds bin (26).

Carefully take out the drip tray (1) – which contains water – and the coffee grounds bin (Fig. 15).

 TRAY

MISSING

Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA. (The tray must be removed from the machine for at least 10 seconds).

 SELECT PRODUCT

15.3 Emptying the drip tray

 EMPTY TRAY

If this information is displayed, the machine will no longer dispense coffee or steam, and the tray must be emptied.

Carefully take out the drip tray (1) – which contains water – and the coffee grounds bin (Fig. 15).

 TRAY MISSING

Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA.

 SELECT PRODUCT

15.4 Drip tray missing

 TRAY MISSING

If this information is displayed, the machine will no longer make coffee. The drip tray (1) has not been installed or not been installed properly.

Insert the drip tray (1) and the coffee grounds bin.

 SELECT PRODUCT

15.5 Filling the bean tank

 FILL BEANS

If this information is displayed, the machine will no longer make coffee. However, the machine will still dispense hot water and steam. Refill beans as described in Chapter 2.4.

 SELECT PRODUCT

15.6 Removing stones from the grinding gear

Switch the machine off using the ON / OFF key (11).

Turn the power switch (27) off.

Open the lid of the bean tank (16) and remove the aroma preser- vation cover (15).

Remove any beans with a vacuum cleaner.

22

Image 22
Contents Impressa XS90/95 Page Page Description of the machine Contents Before you begin Safety information 1.1 WarningsPrecautions Checking electrical fuseFilling the water tank Adjusting the grinding gearPower switch Filling the bean tankAdjusting your machine to the water hardness Cup illuminationInstalling the filter Using a Claris plus filter cartridgeChanging the filter Making coffee with pre-ground coffee powder Rinsing the machineMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees  Machine Rinsing  Select ProductMaking coffee à la carte Making hot waterFrothing one portion of milk with the 2-stage frothing jet Drawing off steamFrothing milk Frothing milk With the 2-stage frothing jetSwitching the Impressa off Cleaning the Professional-Cappuccino Frother and jet Draw OFF Steam Programming the filter MaintenanceProgramming Programming the amount of powder for coffee and espressoSelect  Powder Quantity Water Quantity Water QuantityProgramming the steam portion  TemperatureProgramming the water portion  Portion Economy Economy mode Economy Mode Select Product Time Setting the timeProgramming the automatic switch-on time  Unit onProgramming the automatic switch-off time Programming the languageProgramming the display InformationLocking/releasing the drawing of coffee à la carte Maintenance Filling the water tankLock functions Locking the programming functionDrip tray missing Emptying the coffee groundsEmptying the drip tray Removing stones from the grinding gearPrompt to decalcify Prompt to run cleaning cycleEmptying the system General cleaning instructions CleaningDecalcifying  Fill Water Tank Rinse Water Tank DisposalTips for perfect coffee  Press SteamProblems Problem Cause RemedyTechnical data Legal information