Jura Capresso 95 manual Programming the automatic switch-off time, Programming the language

Page 19

Now press the Rotary Switch (4) to start programming.

 UNIT ON

—:—

Turn the Rotary Switch (4) to set the hours.

 UNIT ON

07:00 (example)

Press the Rotary Switch (4) to confirm the hours and to activate the minutes.

 UNIT ON

07:00

Turn the Rotary Switch (4) to set the minutes.

 UNIT ON

07:15 (example)

Press the Rotary Switch (4) to confirm the minutes.

 UNIT ON

07:15

Now turn the Rotary Switch (4) until the following message is displayed:

 EXIT

Now press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

If the IMPRESSA is switched off with the power switch (27), you will need to set the time again next time you switch the machine on. The machine will prompt you to do so.

13.12 Programming the automatic switch-off time

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 OFF AFTER

 

5 HRS

 

 Now press the Rotary Switch (4) to start programming.

 



OFF AFTER

 

 

5 HRS

 

 Turn the Rotary Switch (4) to set the switch-off time.

 



OFF AFTER

 

 

4 HRS (example)

 

 Confirm the set switch-off time by pressing the Rotary Switch

 

 

(4).

 



OFF AFTER

 

 

4 HRS

 

 Now turn the Rotary Switch (4) until the following message is

 

 

displayed:

E



EXIT

Now press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

13.13 Programming the language

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 LANGUAGE

ENGLISH

Now press the Rotary Switch (4) to start programming.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Impressa XS90/95 Page Page Description of the machine Contents Checking electrical fuse Safety information 1.1 WarningsPrecautions Before you beginFilling the bean tank Adjusting the grinding gearPower switch Filling the water tankCup illumination Adjusting your machine to the water hardnessInstalling the filter Using a Claris plus filter cartridgeChanging the filter  Machine Rinsing  Select Product Rinsing the machineMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees Making coffee with pre-ground coffee powderMaking hot water Making coffee à la carteFrothing milk With the 2-stage frothing jet Drawing off steamFrothing milk Frothing one portion of milk with the 2-stage frothing jetSwitching the Impressa off Cleaning the Professional-Cappuccino Frother and jet Draw OFF Steam Programming the amount of powder for coffee and espresso MaintenanceProgramming Programming the filterWater Quantity  Powder Quantity Water Quantity Select Portion  TemperatureProgramming the water portion Programming the steam portionSelect Product Economy mode Economy Mode  Economy Unit on Setting the timeProgramming the automatic switch-on time  TimeProgramming the language Programming the automatic switch-off timeInformation Programming the displayLocking the programming function Maintenance Filling the water tankLock functions Locking/releasing the drawing of coffee à la carteRemoving stones from the grinding gear Emptying the coffee groundsEmptying the drip tray Drip tray missingPrompt to decalcify Prompt to run cleaning cycleEmptying the system Cleaning General cleaning instructionsDecalcifying  Press Steam DisposalTips for perfect coffee  Fill Water Tank Rinse Water TankProblem Cause Remedy ProblemsLegal information Technical data
Top Page Image Contents