Panasonic VDR-M30PP Initial Settings, Switching Operating Sound On or Off Beep

￿￿￿

Initial Settings

Switching Operating Sound On or Off (Beep)

This DVD Palmcorder will emit sound when the power switch is changed over, the REC button is pressed, or other operations are engaged. If you do not need operating sound, you can switch it off.

Setting	Content
On	Beep is heard
Off	No beep is heard

1 Press the MENU button,	I n i t i a l S e t u p
choose “Beep” on the
	Be e p		On
“Initial Setup” menu	Power S a v e		Of f
	Recor d	LED
screen, and then press the
	Language
￿ button.	Reset

ENTER RETURN RAM

2 Select “On” or “Off”, and then press the ￿ button.

3 Press the MENU button to end the setting.

Note:

The “Beep” setting will be stored in memory even when the DVD Palmcorder is turned off.

Turning DVD Palmcorder Off Automatically (Power Save)

This DVD Palmcorder is equipped with power save function. Specify “Power Save: On”: If the DVD Palmcorder is left in the recording pause status without being operated for 5 minutes, it will automatically turn off to prevent the battery pack from discharging needlessly.

Setting	Content
On	To engage power save
Off	To cancel power save

1 Press the MENU button,	I n i t i a l S e t u p
choose “Power Save” on
	Be e p
the “Initial Setup” menu	Power S a v e		On
	Recor d	LED	Of f
screen, and then press the
	Language
￿ button.	Reset

ENTER RETURN RAM

2 Select “On” or “Off”, and then press the ￿ button.

3 Press the MENU button to end the setting.

Note:

•To turn the DVD Palmcorder on again from automatic off

activated by the power save function, set the power switch to “POWER OFF”, and then set it to “￿ VIDEO”, “￿ PHOTO” or “￿ PHOTO”

•The Power Save setting will not appear in the on-screen information display.

•The Power Save setting will be stored in memory even when the DVD Palmcorder is turned off.

94