Panasonic VDR-M30PP Viewing Subject Through Viewfinder, Viewing Image on LCD Monitor Screen

Viewing Subject Through Viewfinder

1 Pull out the viewfinder.

2 Turn the diopter control knob to adjust the focus to suit your eyesight.

Note:

•If the LCD monitor is open approximately 90°, the viewfinder will be off.

•Focusing will not be correct unless the viewfinder is pulled out.

Diopter control

Pull out the viewfinder.

Viewing Image on LCD Monitor Screen

If you open the LCD monitor, you can monitor subject image on the LCD screen.

1 Open the LCD monitor.

The LCD monitor has a portion where you can hook your finger. Hook the finger there to open the monitor.

●Range where the LCD monitor can be moved

The LCD monitor can be opened up to approximately 90º.

If the LCD monitor is open 90°, it can be tilted with the screen down as much as 90°, and can also be tilted with screen up and turned up to 180° so the screen faces in the same direction as the lens.

If the LCD monitor is turned 180° so the screen faces in the same direction as the lens during recording, subject image will also appear in the viewfinder as an mirror image (left/right reversed).

Tilt the LCD monitor to adjust its vertical angle so that you can see the screen easily.

Note:

•Be sure to open the LCD monitor approximately 90º before changing its vertical angle.

•Do not record for a prolonged time with the LCD monitor turned approximately 180º in close contact with the DVD Palmcorder body: Doing this could cause the DVD Palmcorder and LCD monitor to become hot.

90º

Hook your finger

(Bottom)

90˚

180˚

48