Panasonic VDR-M30PP operating instructions Using External Microphone, Attaching Ferrite Core

Using External Microphone

Connect external microphone (optional-user provided) to the external microphone jack of this DVD Palmcorder. Clearer sound can be recorded. Turn on the switch on microphone and start recording. For details on microphone, see “Major Specifications” on page 165.

To external microphone jack

A/V

MC

Note:

•If the AV/S input/output cable is plugged in, you cannot use external microphone: Unplug the AV/S input/output cable to use the external microphone.

•This DVD Palmcorder cannot use a plug-in power type microphone (power supplied from camcorder).

●Attaching Ferrite Core

Although no ferrite core is attached in the illustrations of the cables in text, be sure to attach the provided core to the external microphone cable using the following procedure:

1 Open the cover of ferrite core.

2 Attach the core to external microphone cable at a position approximately 1-15/16” (5 cm) from its end.

3 Close the cover of core, taking care that it does not catch the external microphone cable.

1-15/16”

(5cm)

Note:

•The Ferrite Core must be installed to minimize RF interference and/or electrical noise that may be picked up by the external microphone cord. It should be installed as close to the plug as possible- as illustrated.

54