Panasonic VDR-M30PP Exiting Disc Navigation, Playing Back from Disc Navigation Screen

Playback pause

Exiting Disc Navigation

1 Press the DISC NAVIGATION button.

Disc Navigation will be terminated and the DVD Palmcorder will enter the recording pause status.

You can also press the ￿button to end Disc Navigation.

Al l	Pr og r ams	0 01 / 014
PLAY		RAM

0 : 0 0 : 0 0 REM3 0 MIN

FINE	8 : 0 0 AM
	S E P 30 2 00 3

Playing Back from Disc Navigation Screen

1

2

Press the DISC NAVIGATION button.

Use the joystick to select the desired scene.

The selected scene will be framed: This is called a “cursor”.

3 Press the ￿ button.

Playback will start from the selected scene.

Note:

Tilting the joystick to left or right will move the cursor to the preceding or following scene.

Tilting it up or down will move to preceding or following page.

Al l	Pr og r ams	001 / 014
PLAY		RAM

Up or Down

Left or Right

Al l	Pr og r ams	007 / 014
PLAY		RAM

￿

●When playback ends:

The DVD Palmcorder will enter the playback pause

status at the last image of last scene.

Pressing the ￿or DISC NAVIGATION button will restore the Disc Navigation screen.

When the playback pause status continues for as long as 5 minutes, the Disc Navigation screen will automatically be restored.

●Playing back stills

A still will be displayed for approx. 3 seconds. When playing back stills on card, playback will stop after each still playback.

Note:

•Press the ￿button to temporarily stop playback. Pressing ￿again will start from that point.

•If you press the ￿button after playback of the last scene on disc finishes, playback will start again from the beginning of disc.

•Pressing the ￿button will always restore the Disc Navigation screen.

•With playback on Disc Navigation, you can select desired scenes for playback and skip unnecessary scenes.

•When playing back a still with a large number of pixels on card, “Playback.” will appear, and it will take some time for the still to appear.

99