Panasonic VDR-M30PP Setting Up the DVD Palmcorder, Attaching adjuster securing tab

Setups

This section explains preparations for recording - setting up the DVD Palmcorder and battery pack.

Setting Up the DVD Palmcorder

Attaching adjuster (securing tab)

1 Pass the belt through the attachment part of 2

DVD Palmcorder.

3

Pass the belt through the adjuster (securing tab).

Adjust the length of hand strap.

Holding DVD Palmcoder

To use as a Grip Belt

Insert your right hand from the bottom of DVD Palmcorder up to the base of your thumb.

Put your hand in a position where you can easily operate the REC button and the Zoom lever.

Adjust the length of grip belt so that the DVD Palmcorder is stable when you press the REC button with your thumb.

2

1

Note:

Do not adjust the grip belt while holding the DVD Palmcorder: Doing this could cause the DVD Palmcorder to fall and be damaged.

3

Caution:

Do not lift the DVD Palmcorder by holding the viewfinder or LCD monitor: If the viewfinder or LCD monitor comes off, the DVD Palmcorder will fall.

34