Panasonic VDR-M30PP operating instructions Recording Stills, When using card

￿￿

Recording Stills

Note:

Recording of still images is possible on DVD-RAM disc and card.

ACCESS/PC	CARD
indicator
	ACCESS
	indicator

Power switch

1 Turn the DVD Palmcorder on.

When using DVD-RAM disc:

Set the power switch to “￿PHOTO”. When using card:

Set the power switch to “￿PHOTO”.

After the ACCESS indicator goes out, perform the subsequent operation:

Still recording mode
REM 9 9 9
Number of recordable stills
8	: 0 0 AM
S E P 30	2 0 0 3

2 Check the subject on the screen (viewfinder or LCD).

3 Press the REC button.

The DVD Palmcorder automatically focuses on the subject at the center of screen (when auto focus is selected).

The screen will be black, and then the recorded still will be displayed. When the “.” mark appears, you can proceed with the next recording; while “DISC ACCESS” or “CARD ACCESS” is being displayed, you cannot proceed with the next recording.

4 Set the power switch to “POWER OFF” to turn the DVD Palmcorder off.

Note:

•See “Still recording quality” on page 56 for details of stills on card.

•Do not operate the power switch or remove the card while the ACCESS/PC or CARD ACCESS indicator is lit or blinking: Doing so may damage the card or the data on card.

(When using DVD-RAM disc)

	REM	9 9 9
FINE	8	: 00AM
	SEP 30	2 0 0 3

(When using card)

55