Panasonic VDR-M30PP operating instructions Available Cards, Handling card, Metal.Terminal, Switch

Available Cards

SD Memory Card and MultiMediaCard can be used on this DVD Palmcorder.

Handling card

•D o not use cards other than the designated ones.

•Do not touch the card terminal or allow it to touch

metal.Terminal

•Do not paste anything other

than exclusive label on label pasting portion.

•Do not subject card to impact, bend card or drop it.

•Do not disassemble card or modify it.

•Do not expose card to water.

•Do not use or store card in the following places:

−Where the temperature is high, such as in vehicle at high temperatures, in direct sunlight or near a heater.

−Where humidity is high, or in dusty place

•When the erasure prevention switch on SD Memory Card is locked, no recording, deletion or editing will be possible on the card.

•It is recommended that you create a backup file for valuable data on hard disk of PC.

•Do not do the following, or the data on card may be damaged or lost:

−Do not remove the card or turn DVD Palmcorder off during reading or writing of data

−Do not use DVD Palmcorder in a place subject to static electricity or electrical noise

Note:

•This DVD Palmcorder can play back image data recorded on other digital cameras conforming to the DCF (Design rule for Camera File system) standard which were established by the Japan Electronics and Information Technology Industries Association (JEITA). The range of image data playable on this DVD Palmcorder is that with pixels from 80 horizontal × 60 vertical to 4000 horizontal × 3000 vertical.

•DCF is an integrated image file format of digital cameras: Image files can be used on all digital devices conforming to DCF.

•Image data edited on PC and certain types of image data may not be visible on this DVD Palmcorder.

•The image data recorded on another device may not be playable on this DVD Palmcorder.

Erasure prevention	Locked status
switch

27