Panasonic VDR-M30PP operating instructions 152

Message		Cause & Troubleshooting	Reference
			page
Card has no data.	This message will appear when the ￿button is pressed with a
	card inserted on which no still is recorded. (It will appear if you		
	attempt playback or editing on Disc Navigation, but will not appear
	if you press ￿ on camera through image.)
Card is not formatted.	Was the card formatted on PC? When using the card on this DVD		129
Format the card now?	Palmcorder, choose “YES” and format it.
Control Information	Mismatch may occur between the recorded image and scene
Error.	information.		130
	Update the control information.
	•	Use another disc.	24, 78
	•	See *3 on page 156.
COPY PROTECTED	The video signal input to this DVD Palmcorder may be copy-
	guarded.
	Some prerecorded video materials, such as movies, are guarded		68
	against copying.
	Copy-guarded materials cannot be recorded on this DVD
	Palmcorder.
DISC ACCESS	The recorded scene is being stored on disc.
	Wait until the message disappears, and you can start to use the		52, 55
	DVD Palmcorder.
	This DVD Palmcorder is verifying whether the correct disc has been
	inserted.
	Wait until the message disappears, and you can start to use the		
	DVD Palmcorder.
	This message will be displayed for a little longer when the date
	changes.
DISC ALMOST FULL	The disc will soon be full, and recording will be impossible.
	Delete unnecessary scenes and try the disc again, or use another		28, 29, 103
	disc.
Disc error has occurred.	•	Disc error occurred during finalizing, and finalizing failed.
Finalizing is not		Replace the disc.	131
complete.	•	See *3 on 156
Disc error has occurred.	• Has the disc been initialized on PC? Has initializing the disc on
Format the disc now?		PC been interrupted?
		Choose “YES” and initialize the disc when using it on this DVD	129
		Palmcorder. Initializing the disc will erase all data on it.
	•	See *2 on page 156.
Disc error has occurred.	The disc may be dirty.
Formatting is not	Remove the disc and wipe off fingerprints, dust, etc. before reusing
complete.	it, or use another disc.		78, 129
	This message may also appear if you insert a disc for which
	formatting was interrupted midway. In this case, use another disc.
Disc error has occurred.	Disc error could have occurred during editing of scenes.
Keep disc inside &	Turn off the DVD Palmcorder with the disc being used in it, connect		42
restart.	AC adapter/charger, and then power the DVD Palmcorder again.
	Repair of scenes will be tried.

152