Jura Capresso IMPRESSA XS90, 95 manual Programming the water portion, Programming the steam portion

Page 16

13.6Programming the temperature for coffee, espresso and coffee à la carte

You can adjust the temperature for each type of coffee separately. The temperature can be set to 2 different levels (NORMAL, HIGH).

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 TEMPERATURE

Now press the Rotary Switch (4) to start programming.

 SELECT PRODUCT

Then press a product key of your choice.

 TEMPERATURE

NORMAL (example)

Now turn the Rotary Switch (4) until the required temperature is set.

 TEMPERATURE

HIGH (example)

Confirm the selected setting by pressing the Rotary Switch (4).

 TEMPERATURE

Now turn the Rotary Switch (4) until the following message is displayed:

 EXIT

Now press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

13.7 Programming the water portion

The system’s basic settings include a pre-defined amount of water (225 ml). However, this amount can be modified as required.

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 WATER

PORTION

Press the Rotary Switch (4) to activate the program item.

 PORTION

225 ML (example)

Turn the Rotary Switch (4) to adjust the amount of water and then confirm your setting by pressing the Rotary Switch (4).

 WATER

PORTION

Turn the Rotary Switch (4) until the following message is dis- played:

 EXIT

Press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

13.8 Programming the steam portion

The system’s basic settings include a pre-defined steam portion (20 sec.). However, this amount can be modified as required.

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Impressa XS90/95 Page Page Description of the machine Contents Safety information 1.1 Warnings PrecautionsBefore you begin Checking electrical fuseAdjusting the grinding gear Power switchFilling the water tank Filling the bean tankAdjusting your machine to the water hardness Cup illuminationInstalling the filter Using a Claris plus filter cartridgeChanging the filter Rinsing the machine Making coffee Espresso, 2 espressos, 1 coffee, 2 coffeesMaking coffee with pre-ground coffee powder  Machine Rinsing  Select ProductMaking coffee à la carte Making hot waterDrawing off steam Frothing milkFrothing one portion of milk with the 2-stage frothing jet Frothing milk With the 2-stage frothing jetSwitching the Impressa off Cleaning the Professional-Cappuccino Frother and jet Draw OFF Steam Maintenance ProgrammingProgramming the filter Programming the amount of powder for coffee and espresso Powder Quantity  Water QuantitySelect Water Quantity Temperature Programming the water portionProgramming the steam portion  PortionEconomy mode  Economy Mode Economy Select ProductSetting the time Programming the automatic switch-on time Time  Unit onProgramming the automatic switch-off time Programming the languageProgramming the display InformationMaintenance Filling the water tank Lock functionsLocking/releasing the drawing of coffee à la carte Locking the programming functionEmptying the coffee grounds Emptying the drip trayDrip tray missing Removing stones from the grinding gearPrompt to decalcify Prompt to run cleaning cycleEmptying the system General cleaning instructions CleaningDecalcifying Disposal Tips for perfect coffee Fill Water Tank Rinse Water Tank  Press SteamProblems Problem Cause RemedyTechnical data Legal information
Top Page Image Contents