Making coffee à la carte, Making hot water

1 ESPRESSO (example)

POWDER

The coffee brewing process stops automatically as soon as the set amount of water has run through.

SELECT PRODUCT

To stop the brewing process prematurely, press any of the product keys.

We recommend always using powder from fresh coffee beans or pre-ground, vacuum-packed coffee. Never fill in more than 2 scoops of powder. The filler funnel is no storage tank. Make sure the coffee powder you use is not too fine. This may block the system and cause the coffee only to drip out of the coffee spout.

If you have pressed the selection key unintentionally, press any of the product keys to cancel your selection.

You can change the amount of water while the machine is brewing coffee. To do so, turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML.

The amounts given in ML are approximate values and may vary from the effective quantity.

8. Making coffee à la carte

SELECT PRODUCT

Place 1 cup under the coffee spout (18) and open the program- ming door (3). Press the Coffee à la Carte key .

A LA CARTE

XMILD

Turn the Rotary Switch (4) until the display indicates the desired coffee strength and press the Rotary Switch (4) to make the cof- fee. The pre-brewing process (I.P.B.A.S.) moistens the coffee powder, briefly interrupts the flow of hot water and then begins with the actual brewing process.

A LA CARTE

XSTRONG (example)

The coffee brewing process stops automatically as soon as the set amount of water has run through.

SELECT PRODUCT

			To stop the brewing process prematurely, press any of the
			To stop the brewing process prematurely, press any of the
			product keys.


			You can change the amount of water while the machine is
			You can change the amount of water while the machine is
			brewing coffee. To do so, turn the Rotary Switch (4) until the		E
			display indicates the required amount (ML). The amount of
			water can be selected in increments of 5 ML.
			water can be selected in increments of 5 ML.
			The amounts given in ML are approximate values and may
			The amounts given in ML are approximate values and may
			vary from the effective quantity.
			vary from the effective quantity.

9. Making hot water

SELECT PRODUCT

Place 1 cup or 1 glass under the hot water spout (25) and turn the Hot Water switch (22) to .

WATER

PORTION

The machine stops dispensing water automatically as soon as the set amount of water has been dispensed.

CLOSE TAP

Turn the switch (22) back to .