Jura Capresso IMPRESSA XS90, 95 manual Drawing off steam, Frothing milk,  Steam Portion

To stop the process prematurely, turn the switch (22) back to .

You can also change the amount of water set while the machine is brewing coffee. Open the programming door. Turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML.

The amounts given in ML are approximate values and may vary from the effective quantity.

10. Drawing off steam

Make sure the nozzle has engaged properly. If the nozzle is clogged with dried milk or has not been attached properly, it might suddenly come off during operation.

To ensure perfect operation, clean the 2-stage frothing jet (24) regularly. Use the opening provided on the handle of the measuring spoon for the purpose to unscrew the 2-stage frothing nozzle (Fig. 14). Thoroughly rinse the 3 parts under running water.

Steam can be used for heating liquids and frothing milk for cappuccino. When heating liquids, make sure the 2-stage frothing jet (24) is pushed up. To froth liquids, push the 2-stage frothing jet (Fig. 5) downwards, turning it slightly.

A small amount of water leaks from the jet when you start frothing. This does not affect the result, e.g. when frothing milk.

There might be some initial splashing when drawing off steam. The steam jet gets hot. Avoid direct contact with the skin!

 SELECT PRODUCT

Place a cup under the pivoting steam spout (23) and dip the 2-stage frothing jet (24) in the milk to be frothed or the liquid to be heated.

Press the Steam Portion key .

 STEAM PORTION

You can stop the process any time by pressing the Steam Portion key .

 SELECT PRODUCT

You can set the duration of drawing off steam in 1-second increments with the Rotary Switch (4).

11. Frothing milk

The IMPRESSA is ready to froth milk when both Steam key lights

light up constantly.

If the lights are off, press one of the two Steam keys .

11.1Frothing one portion of milk (with the 2-stage frothing jet)

 SELECT PRODUCT

Pour milk into a jug or similar receptacle.

Dip the 2-stage frothing jet (24) into the milk and press the key.

 STEAM PORTION

The steam dispensing process stops automatically.

11.2Frothing milk

(with the 2-stage frothing jet)

 SELECT PRODUCT

Pour milk into a jug or similar receptacle.

12