15.11 General cleaning instructions
Never use sharp objects or caustic chemicals for cleaning.
Clean the case using a soft, damp cloth.
Clean the pivoting steam spout (23) after each use.
After heating milk, draw off some hot water to clean the inside of the pivoting steam spout (23).
Remove the
The water tank should be rinsed out and filled with fresh water daily.
Visible calcification in the water tank can be removed using a commercial decalcifying agent. To do so, remove the water tank from the machine.
If you are using a CLARIS plus filter cartridge, remove it from the tank first.
16. Cleaning
The IMPRESSA features an integrated cleaning program. The process takes approx.15 minutes.
Please contact your authorized dealer for JURA cleaning tablets that are suitable specifically for the cleaning program of your IMPRESSA. Please note that the use of unsuitable cleaning agents may cause damage to your machine and could leave unfavourable residues in the water.
Once started, the cleaning process must not be interrupted.
SELECT PRODUCT CLEAN MACHINE
Press Rinse 
until the following message appears:
EMPTY TRAY / EMPTY GROUNDS
Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).
TRAY
MISSING
Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA.
PRESS
RINSE
Place a sufficiently large receptacle (ca. 0.5 litres) under the coffee spout (18).
Press Rinse 
.
MACHINE
CLEANING
You will hear an acoustic signal.
ADD
TABLET / PRESS RINSE
Open the lid of the filler funnel for
Press Rinse 
.
MACHINE
CLEANING
You will hear an acoustic signal.
EMPTY TRAY / EMPTY GROUNDS
Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).
TRAY
MISSING
Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA.
SELECT PRODUCT
24