Jura Capresso 65349R3 warranty HOT Milk and HOT Chocolate, Special Coffee Button Coffee Ready

Page 17

Please note: Cold milk will stay fresh up to 8 hours in the thermal milk container. Do not leave the milk sitting outside the refrigerator over night.

Please note: If there is not enough milk in the milk container, the frother nozzle will dispense steam only. Stop the frothing action and refill the milk container.

Please note: If the Dial points to the cappuccino position and you do not get froth on your milk, check the following items: a. Make sure all connections are tight.

b. Remove the venting tip (Fig. 5a) and squeeze the bottom part. Milk might have closed the venting lip. Replace venting tip.

c. Skim milk will create considerably more froth than regular milk. Soy milk will produce very little froth.

15. HOT MILK AND HOT CHOCOLATE

The Milk Button (Fig. 3) lets you produce hot milk or hot chocolate.

•Connect the long hose to the Dial system and insert the other end into the container with cold milk or cold chocolate milk.

•Set the Dial to the cappuccino or the latte setting.

•Place a cup underneath the Auto Cappuccino System.

COFFEE READY

•Push the Milk Button

The display shows MILK 20 SEC. The Z5 will produce hot milk for 20 seconds and then stop automatically.

You can always change the duration by turning the Rotary Dial. You can stop the milk flow by pushing the Rotary Dial or any beverage button.

Tip: Without moving the cup you can now add coffee using the Special Coffee Button. .

16.SPECIAL COFFEE BUTTON COFFEE READY

•Place a cup under the Auto Cappuccino System.

Make sure the long or the short nozzle system is installed.

•Push the SPECIAL COFFEE button (Fig. 3). The Z5 will brew a cup coffee from the back nozzle and will stop automatically. This button is useful if you want to create special milk drinks that are not pre-set with any of the other buttons.

•As explained in chapter 11, you can change the strength and the volume for this button, just before brewing.

17. CAPPUCCINO RINSING CYCLE CAPPU RINSE

Ten minutes after using the milk or the cappuccino buttons, the display will show the messages CAPPU RINSE, COFFEE READY, CAPPU RINSE and so on. At the same time the Rinse Button will illuminate.

•Place a cup underneath the Auto Cappuccino System.

•Turn the Dial all the way down to the steam position (Fig. 5f).

•Push the rinse button. CAPPUCCINO RINSING. For a few seconds the Z5 will push hot water through the Dual Nozzle System to remove any milk deposits.

COFFEE READY

•Turn the selector switch back to the Cappuccino or Latte position. Please note: If the CAPPU RINSE message appears and you do not plan to use the milk or cappuccino button within the next few minutes, we highly recommend to run this rinse cycle without delay. Warm milk inside the dual nozzle will deteriorate within a short period of time and milk fats can create foul smells. Please note: You can also perform a cappuccino rinsing cycle manually using maintenance menu (chapter 26.1).

17.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Impressa Z5 Important Safeguards Jura-Capresso LLC Customer ServiceUsed Coffee Container Tray F F E E R E a D Y Gap Milk Coffee Nozzle Nozzle Milk & Froth Page Table of Contents 2-Cup Buttons Special Cup Button Product Warranty Registration 3c. Coffee Facts PLEASE, DON’T... or you void your warranty protection3b. Different Coffee Drinks Preparing the Machine for the First Time Factory SettingsPLEASE, do Coffee Ready 6c. Turning the Machine onWelcome to Jura Unit is Heating Press Rinse Daily Preparation Adjusting the GrinderONE-TOUCH Beverage Buttons Fig Brewing Coffee and EspressoAuto Cappuccino System Overriding Strength and CUP Size During BrewingCappuccino and Latte Overriding the Cappuccino SettingsCappuccino Milk 15 SECCappuccino Rinsing Cycle Cappu Rinse HOT Milk and HOT ChocolateSpecial Coffee Button Coffee Ready Cleaner for Cappuccino Press Button Cappuccino Cleaning CycleCleaning the Dial Component Water for Cappuccino Press ButtonWater Care Using PRE-GROUND CoffeeUsing HOT Water Filter no Clearyl Water Filter CartridgeCartridge Water Hardness Monitor Push the Rinse Button. Insert Filter Press ButtonFilter 24a. Changing the Water Hardness MonitorChanging PRE-SET CUP Sizes Confirmed Coffee ReadyEnough Water Press Button Enough Milk Press ButtonMaintenance Maintenance ProgramsRinse Unit Cappuccino Cleaning Clean Unit Cappuccino RinsingChanging the temperature TemperatureTemperature Coffee Strength / AromaMilk Programming Energy Saving Settings The factory setting is Save noSave no Save LevelActual Time Save LevelAUTO-ON AUTO-OFFLet’s change the 1 Espresso name to CUP of JOE InformationRenaming Coffee Ready Fill Beans Coffee Ready Clean Tablet Cleaning ProcessBean Cover Missing Empty Coffee GroundsGrounds Empty Decalcifying ProcessTips for Better Coffee Pre-warm cups Height adjustable coffee-spoutEmptying System Before Transport Old beans Trouble ShootingInsufficient Frothed Milk Production Make sure Grinder Makes AN Extremely Loud Noise no Beans are GroundError 1, Error 3, Error 4, Error Error MessagesError Error 6, Error 7, ErrorOther limitations and exclusions Limited WarrantyJura-Capresso, LLC

65349R3 specifications

The Jura Capresso 65349R3 is a high-end coffee machine designed for enthusiasts who appreciate quality and convenience. With its sleek design and robust features, this machine is a favorite among coffee lovers looking to create café-quality espresso at home.

One of the main features of the Jura Capresso 65349R3 is its innovative brewing system. Equipped with a high-performance pump, it can reach a pressure of 15 bars, which is essential for extracting the rich flavors and aromas from coffee grounds. This ensures that every shot of espresso is brewed to perfection, delivering a full-bodied taste that rivals professional machines.

The machine comes with an integrated conical burr grinder that allows users to grind fresh coffee beans right before brewing. This not only maximizes the flavor but also ensures the coffee retains its freshness. Users can customize the grind settings to suit their taste preferences, ranging from fine for espresso to coarse for other coffee styles.

One of the standout technologies in the Jura Capresso 65349R3 is the Intelligent Pre-Brew Aroma System. This feature moistens the coffee grounds before brewing, allowing for optimal flavor extraction. Additionally, the machine is equipped with a programmable coffee strength selector, enabling users to choose their desired intensity from mild to strong.

The brewing unit is easily removable, making cleaning and maintenance a breeze. This is complemented by the automatic rinsing and cleaning program, which ensures the machine remains in top condition with minimal effort. The water reservoir also has a generous capacity, reducing the need for frequent refills.

Another key characteristic of the Jura Capresso 65349R3 is its user-friendly interface. The intuitive control panel features a clear display that guides users through the brewing process, making it suitable for both beginners and seasoned baristas. Furthermore, the machine offers various drink options, including espresso, cappuccino, and latte macchiato, all at the touch of a button.

The Jura Capresso 65349R3 also prioritizes energy efficiency, featuring an energy-saving mode that reduces power consumption when not in use. This not only benefits the environment but also helps users save on electricity bills.

In summary, the Jura Capresso 65349R3 is a versatile and technologically advanced coffee machine that combines aesthetics with functionality. Its superior brewing capabilities, customizable features, and ease of use make it an excellent choice for anyone looking to elevate their coffee experience at home.
Top Page Image Contents