Jura Capresso 65349R3 Emptying System Before Transport, Tips for Better Coffee Pre-warm cups

Page 32

approx. 35 minutes the Z5 will pump the decalcifying solution in intervals through the Milk Nozzle, then internally into the drawer, then through the Hot Water Spout and again into the drawer. When the water container is empty the display will show TRAY / GROUNDS EMPTY.

g. Remove the containers. Then remove and empty the drawer and used coffee container and replace complete assembly (Fig. 2).

h. WATER TANK FILL. Remove the water tank, thoroughly rinse it and fill with fresh cold water.

i.Replace the water tank.

j.PRESS BUTTON. Place one container underneath the Milk Nozzle and one container underneath the Dual Coffee Spouts and the Hot Water Spout. Each container should have at least an 8 oz. capacity.

k.Push the Rinse Button. MACHINE IS DECALCIFYING. For the next few minutes the Z5 will pump the fresh water through the Milk Nozzle, then internally into the drawer and finally through

the Hot Water Spout to remove all decalcifying traces. l. At the end of the decalcifying cycle the display shows

MACHINE IS HEATING. After a few seconds the Z5 will automatically run a rinse cycle through the Dual Coffee Spouts. RINSING.

m. TRAY / GROUNDS EMPTY Remove the containers and remove and empty the drawer and used coffee container and replace complete assembly (Fig. 2).

COFFEE READY.

Tip: You can run a decalcifying cycle at anytime even if the machine does not prompt you.

COFFEE READY

•Push and hold the Rotary Dial until the display shows FILTER.

•Turn the dial until the display shows: MAINTENANCE

•Push the dial and select DECALCIFYING UNIT.

•Push the dial again. TRAY GROUNDS EMPTY. Continue with step b. through l. above.

30. EMPTYING SYSTEM BEFORE TRANSPORT

This procedure is necessary to prevent water and frost damage in case you intend to transport the machine.

•Turn the machine off with the on/off button on top of the machine. The main power switch is still on.

•Remove the water tank.

•Place a cup underneath the Hot Water Spout and place a cup underneath the Auto Cappuccino System.

•Push and hold the Rinse button until the display shows SYS EMPTY. The Z5 will release a bit of water and steam and will turn off automatically.

•Before transport make sure the Water Container and the Bean

Container are empty.

Please note: Use the original inside and outside carton for transport, or you can order a custom molded, special service ship- ping container through our customer service department ($40).

31.TIPS FOR BETTER COFFEE Pre-warm cups.

If your cup is pre-warmed, your coffee will stay warm longer, especially when you prepare small cups. Use the hot water spout to pre-warm your cups.

Height adjustable coffee-spout

32.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Impressa Z5 Important Safeguards Customer Service Jura-Capresso LLCUsed Coffee Container Tray F F E E R E a D Y Gap Milk Coffee Nozzle Nozzle Milk & Froth Page Table of Contents 2-Cup Buttons Special Cup Button Product Warranty Registration 3c. Coffee Facts PLEASE, DON’T... or you void your warranty protection3b. Different Coffee Drinks Preparing the Machine for the First Time Factory SettingsPLEASE, do Coffee Ready 6c. Turning the Machine onWelcome to Jura Unit is Heating Press Rinse Adjusting the Grinder Daily PreparationONE-TOUCH Beverage Buttons Fig Brewing Coffee and EspressoOverriding Strength and CUP Size During Brewing Auto Cappuccino SystemOverriding the Cappuccino Settings Cappuccino and LatteCappuccino Milk 15 SECCappuccino Rinsing Cycle Cappu Rinse HOT Milk and HOT ChocolateSpecial Coffee Button Coffee Ready Cappuccino Cleaning Cycle Cleaner for Cappuccino Press ButtonCleaning the Dial Component Water for Cappuccino Press ButtonWater Care Using PRE-GROUND CoffeeUsing HOT Water Filter no Clearyl Water Filter CartridgeCartridge Push the Rinse Button. Insert Filter Press Button Water Hardness Monitor24a. Changing the Water Hardness Monitor FilterChanging PRE-SET CUP Sizes Confirmed Coffee ReadyEnough Milk Press Button Enough Water Press ButtonMaintenance Programs MaintenanceRinse Unit Cappuccino Cleaning Clean Unit Cappuccino RinsingTemperature Changing the temperatureTemperature Coffee Strength / AromaEnergy Saving Settings The factory setting is Save no Milk ProgrammingSave no Save LevelSave Level Actual TimeAUTO-ON AUTO-OFFLet’s change the 1 Espresso name to CUP of JOE InformationRenaming Coffee Ready Fill Beans Tablet Cleaning Process Coffee Ready CleanBean Cover Missing Empty Coffee GroundsDecalcifying Process Grounds EmptyTips for Better Coffee Pre-warm cups Height adjustable coffee-spoutEmptying System Before Transport Trouble Shooting Old beansInsufficient Frothed Milk Production Make sure Grinder Makes AN Extremely Loud Noise no Beans are GroundError Messages Error 1, Error 3, Error 4, ErrorError Error 6, Error 7, ErrorLimited Warranty Other limitations and exclusionsJura-Capresso, LLC

65349R3 specifications

The Jura Capresso 65349R3 is a high-end coffee machine designed for enthusiasts who appreciate quality and convenience. With its sleek design and robust features, this machine is a favorite among coffee lovers looking to create café-quality espresso at home.

One of the main features of the Jura Capresso 65349R3 is its innovative brewing system. Equipped with a high-performance pump, it can reach a pressure of 15 bars, which is essential for extracting the rich flavors and aromas from coffee grounds. This ensures that every shot of espresso is brewed to perfection, delivering a full-bodied taste that rivals professional machines.

The machine comes with an integrated conical burr grinder that allows users to grind fresh coffee beans right before brewing. This not only maximizes the flavor but also ensures the coffee retains its freshness. Users can customize the grind settings to suit their taste preferences, ranging from fine for espresso to coarse for other coffee styles.

One of the standout technologies in the Jura Capresso 65349R3 is the Intelligent Pre-Brew Aroma System. This feature moistens the coffee grounds before brewing, allowing for optimal flavor extraction. Additionally, the machine is equipped with a programmable coffee strength selector, enabling users to choose their desired intensity from mild to strong.

The brewing unit is easily removable, making cleaning and maintenance a breeze. This is complemented by the automatic rinsing and cleaning program, which ensures the machine remains in top condition with minimal effort. The water reservoir also has a generous capacity, reducing the need for frequent refills.

Another key characteristic of the Jura Capresso 65349R3 is its user-friendly interface. The intuitive control panel features a clear display that guides users through the brewing process, making it suitable for both beginners and seasoned baristas. Furthermore, the machine offers various drink options, including espresso, cappuccino, and latte macchiato, all at the touch of a button.

The Jura Capresso 65349R3 also prioritizes energy efficiency, featuring an energy-saving mode that reduces power consumption when not in use. This not only benefits the environment but also helps users save on electricity bills.

In summary, the Jura Capresso 65349R3 is a versatile and technologically advanced coffee machine that combines aesthetics with functionality. Its superior brewing capabilities, customizable features, and ease of use make it an excellent choice for anyone looking to elevate their coffee experience at home.
Top Page Image Contents