Jura Capresso 65349R3 warranty Temperature, Changing the temperature, Coffee Strength / Aroma

To activate one of the above programs, push the Rotary Dial and follow the instructions on the display.

Please note: If you do not select any of the Maintenance Programs, the display will return to COFFEE READY.

26.2 TEMPERATURE

You can set the coffee temperature for the Cappuccino Button, the Special Coffee Button and the four coffee buttons on the right side to LOW, NORMAL or HIGH. The factory setting for these buttons is HIGH. The temperature difference between LOW and HIGH is approx. 7º F.

Please note: the temperature also depends somewhat on the fineness setting of the grinder (chapter 7). The finer the grind the slower the water will pass through the coffee causing it to get somewhat hotter.

Changing the temperature:

COFFEE READY

•Push and hold the Rotary Dial until you hear a beep and the display shows FILTER.

•Turn the dial until the display shows:

TEMPERATURE

a. Push the Rotary Dial. SELECT PRODUCT.

b. Push the beverage button for which you want to change the

temperature, e.g. the 1-cup Espresso Button. The display shows 1 ESPRESSO HIGH.

c. Turn the Rotary Dial and select NORMAL (example). d. Push the Rotary Dial to confirm. CONFIRMED ✔

e. TEMPERATURE. To change another beverage button start with a. again.

26.3 COFFEE STRENGTH / AROMA

You can set the coffee strength for the Cappuccino Button, the Special Coffee Button and the four coffee buttons on the right side to XMILD, MILD, NORMAL, STRONG, XSTRONG. For factory settings see chapter 5. In XMILD the 1-cup buttons grind for about 4 seconds, in XSTRONG for about 8 seconds. The 2-cup buttons grind between 7 and 10 seconds respectively. The minimum amount of coffee to be ground is approx. 5 grams, the maximum approx. 16 grams.

Please note: the amount of ground coffee also depends on the fineness settings of the burr grinder. The coarser the setting the more coffee is ground through the burrs.

COFFEE READY

•Push and hold the Rotary Dial until you hear a beep and the display shows FILTER.

•Turn the dial until the display shows: AROMA

a. Push the Rotary Dial. SELECT PRODUCT.

b. Push the beverage button for which you want to change the coffee strength, e.g. the 2-cup Coffee Button. The display shows 2 COFFEE NORMAL.

c. Turn the Rotary Dial and select XSTRONG.

d. Push the Rotary Dial to confirm. CONFIRMED ✔

e. AROMA. To change another beverage button start with a.

26.4 CAPPUCCINO PROGRAMMING

Chapter 25.2 explains how to change the pre-sets for milk and the coffee volume while the Z5 is brewing. In programming you can simply change the pre-sets by changing the values shown in the display without making the beverage.