is no need to pull out the drawer unless you see the message EMPTY GROUNDS (chapter 27.4).
Please note: You can always stop the brewing process by pressing the Rotary Dial or any of the eight beverage buttons. This will not affect the
11.OVERRIDING STRENGTH AND CUP SIZE DURING BREWING.
With the Z5’s override feature you are always able to change certain settings just before brewing without affecting the
For the four coffee buttons on the right side, you can override the strength and the coffee volume.
COFFEE READY
•First turn the Rotary Dial. It will display five different strength settings XMILD, MILD, NORMAL, STRONG, XSTRONG.
•Select the one you like and then push one of the four coffee buttons. Once you pushed the coffee button, the display will again show the strength setting you just selected.
•You can now change the coffee volume.
•Turn the Rotary Dial and the display will show the coffee volume
in oz. Turn the dial until the desired volume is set.
Please note: When you select a different strength you must push one of the coffee buttons within the next 3 seconds, otherwise the Z5 reverts back to COFFEE READY.
Please note: When you push one of the double cup buttons and you change the volume, the display will always show the volume
per cup, e.g. if you choose 7 oz. the Z5 will actually brew a total of 14 oz.
Example: The
Assume you want to use this button to make a MILD 4 oz. cup.
COFFEE READY
•Turn the Rotary Dial until the display shows MILD, push the
•When it starts brewing, turn the Rotary Dial until the display shows 4.0 OZ.
The next time you use the
12. AUTO CAPPUCCINO SYSTEM
The three buttons on the left side of the operating panel produce beverages which are brewed through the Auto Cappuccino System (Fig. 1,13). We recommend watching the DVD.
The Auto Cappuccino System has the following components:
•Dual fixed spouts coming out of the machine, (Fig. 5).
•Dial Component with the small removable venting tip (Fig. 5a).
•The removable Dual Nozzle system. The long system is already attached to the machine. If you use tall cups or glasses you can replace the long Dual Nozzle System with a shorter one (Fig. 5b). It is included in the Welcome Pack.
The nozzle that is positioned closer to the machine will deliver coffee, this is called the Coffee Nozzle (Fig. 5e). The nozzle in the front will deliver hot steamed and frothed milk, this is called the Milk Nozzle (Fig. 5e).
15.