Jura Capresso 65349R3 Adjusting the Grinder, Daily Preparation, ONE-TOUCH Beverage Buttons Fig

Page 14

Z5 enough time to completely charge its internal back-up battery. When fully charged, the internal battery will back up the clock for up to eight weeks.

7. ADJUSTING THE GRINDER

You can adjust the grinder to the roast of your coffee. We recommend the following:

Light roast: use a finer adjustment.

Dark roast: use a coarser adjustment.

•Open the Cover Lid (Fig. 1,1)

•While the grinder is running, turn the Grind Selector to

the desired position (Fig. 4).

Coarser: Turn the dial towards the bean symbol.

Finer: Turn the dial away from the bean symbol.

Important: The grinding grade can only be adjusted while the grinder is actually grinding.

8. DAILY PREPARATION

We recommend filling the water container every morning with fresh, cold water. This will enhance the taste of your coffee.

•Make sure the Main Power Switch is on (Fig. 3a). In this case the On/Off button on top is illuminated.

•Push the On/Off button on top of the machine. The display shows MACHINE IS HEATING. After approx. 2 minutes the display shows RINSE.

•Push the Rinse Button (Fig. 3). Hot water will warm up all internal parts and pump through the coffee spouts. The water will be caught in the drawer underneath. The rinse cycle stops by itself and the display reads: COFFEE READY. You are now ready to make coffee.

9. ONE-TOUCH BEVERAGE BUTTONS (Fig. 3)

The Z5 has eight beverage buttons. The first three buttons on the left side produce beverages coming out of the Auto- Cappuccino-System on the left side of the machine.

The forth button on the left side produces hot water through the hot water spout (Fig.1,6).

The four buttons on the right side produce different kinds of coffee beverages through the Dual Coffee Spout in the middle. All beverage buttons are pre-set to certain volumes and strengths (chapter 5).

10. BREWING COFFEE AND ESPRESSO

(1 Espresso, 2 Espressos, 1 Coffee, 2 Coffees)

The four buttons on the right side of the Operating Panel (Fig. 3) deliver coffee through the Dual Coffee Spouts (Fig. 1,5).

•Place one or two cups underneath Dual Coffee Spouts and push the desired button.

The Impressa Z5 will grind, tamp and then brew the coffee. It uses a 2-step brewing process (Pre-Brew Aroma System). First, it moistens the ground coffee (pre-brew phase), pauses for a few seconds, and then starts the brewing process. The display will show the name of the button you pushed, e.g.

1 ESPRESSO and then the strength which was programmed for this button, e.g. STRONG. The brewing process stops automatically as soon as the programmed volume of coffee is produced. When the display shows COFFEE READY you can brew the next cup of coffee.

Very Important: After the brewing stops the Z5 will discard the used coffee. Please do not try to pull out the drawer (Fig. 2) during this time. It can seriously damage the machine. There

14.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Impressa Z5 Important Safeguards Customer Service Jura-Capresso LLCUsed Coffee Container Tray F F E E R E a D Y Gap Milk Coffee Nozzle Nozzle Milk & Froth Page Table of Contents 2-Cup Buttons Special Cup Button Product Warranty Registration 3c. Coffee Facts PLEASE, DON’T... or you void your warranty protection3b. Different Coffee Drinks Preparing the Machine for the First Time Factory SettingsPLEASE, do Coffee Ready 6c. Turning the Machine onWelcome to Jura Unit is Heating Press Rinse ONE-TOUCH Beverage Buttons Fig Adjusting the GrinderDaily Preparation Brewing Coffee and EspressoOverriding Strength and CUP Size During Brewing Auto Cappuccino SystemCappuccino Overriding the Cappuccino SettingsCappuccino and Latte Milk 15 SECCappuccino Rinsing Cycle Cappu Rinse HOT Milk and HOT ChocolateSpecial Coffee Button Coffee Ready Cleaning the Dial Component Cappuccino Cleaning CycleCleaner for Cappuccino Press Button Water for Cappuccino Press ButtonWater Care Using PRE-GROUND CoffeeUsing HOT Water Filter no Clearyl Water Filter CartridgeCartridge Push the Rinse Button. Insert Filter Press Button Water Hardness MonitorChanging PRE-SET CUP Sizes 24a. Changing the Water Hardness MonitorFilter Confirmed Coffee ReadyEnough Milk Press Button Enough Water Press ButtonRinse Unit Cappuccino Cleaning Maintenance ProgramsMaintenance Clean Unit Cappuccino RinsingTemperature TemperatureChanging the temperature Coffee Strength / AromaSave no Energy Saving Settings The factory setting is Save noMilk Programming Save LevelAUTO-ON Save LevelActual Time AUTO-OFFLet’s change the 1 Espresso name to CUP of JOE InformationRenaming Coffee Ready Fill Beans Bean Cover Missing Tablet Cleaning ProcessCoffee Ready Clean Empty Coffee GroundsDecalcifying Process Grounds EmptyTips for Better Coffee Pre-warm cups Height adjustable coffee-spoutEmptying System Before Transport Insufficient Frothed Milk Production Make sure Trouble ShootingOld beans Grinder Makes AN Extremely Loud Noise no Beans are GroundError Error MessagesError 1, Error 3, Error 4, Error Error 6, Error 7, ErrorLimited Warranty Other limitations and exclusionsJura-Capresso, LLC

65349R3 specifications

The Jura Capresso 65349R3 is a high-end coffee machine designed for enthusiasts who appreciate quality and convenience. With its sleek design and robust features, this machine is a favorite among coffee lovers looking to create café-quality espresso at home.

One of the main features of the Jura Capresso 65349R3 is its innovative brewing system. Equipped with a high-performance pump, it can reach a pressure of 15 bars, which is essential for extracting the rich flavors and aromas from coffee grounds. This ensures that every shot of espresso is brewed to perfection, delivering a full-bodied taste that rivals professional machines.

The machine comes with an integrated conical burr grinder that allows users to grind fresh coffee beans right before brewing. This not only maximizes the flavor but also ensures the coffee retains its freshness. Users can customize the grind settings to suit their taste preferences, ranging from fine for espresso to coarse for other coffee styles.

One of the standout technologies in the Jura Capresso 65349R3 is the Intelligent Pre-Brew Aroma System. This feature moistens the coffee grounds before brewing, allowing for optimal flavor extraction. Additionally, the machine is equipped with a programmable coffee strength selector, enabling users to choose their desired intensity from mild to strong.

The brewing unit is easily removable, making cleaning and maintenance a breeze. This is complemented by the automatic rinsing and cleaning program, which ensures the machine remains in top condition with minimal effort. The water reservoir also has a generous capacity, reducing the need for frequent refills.

Another key characteristic of the Jura Capresso 65349R3 is its user-friendly interface. The intuitive control panel features a clear display that guides users through the brewing process, making it suitable for both beginners and seasoned baristas. Furthermore, the machine offers various drink options, including espresso, cappuccino, and latte macchiato, all at the touch of a button.

The Jura Capresso 65349R3 also prioritizes energy efficiency, featuring an energy-saving mode that reduces power consumption when not in use. This not only benefits the environment but also helps users save on electricity bills.

In summary, the Jura Capresso 65349R3 is a versatile and technologically advanced coffee machine that combines aesthetics with functionality. Its superior brewing capabilities, customizable features, and ease of use make it an excellent choice for anyone looking to elevate their coffee experience at home.
Top Page Image Contents