Jura Capresso 65349R3 warranty Using PRE-GROUND Coffee, Using HOT Water, Water Care

Page 19

20. USING PRE-GROUND COFFEE

You can also use pre-ground coffee, bypassing the grinder. This comes in handy if someone requests decaf coffee or a decaf cappuccino. You can also use the pre-ground funnel for ground flavored coffee.

Please note: Never fill the funnel with instant coffee. Do not fill the funnel with more than two scoops. The funnel is not a storage container. If coffee is ground too fine it might be processed very slowly or the Z5 will interrupt the process altogether.

COFFEE READY

Place one or two cups under the Dual Coffee Spouts or the Auto Cappuccino System. Open the Cover Lid and then open the Lid for Ground Coffee (Fig. 4). Opening this lid automati- cally disengages the grinder. The display shows PRE-GROUND FILL POWDER.

Add one or two level scoops of pre-ground coffee into the funnel and close the lid Fig. 12). The display shows PRE-GROUND SELECT PRODUCT.

Push any of the six coffee producing buttons. The Z5 will brew the selected beverage. During brewing you can still change the

coffee volume by turning the Rotary Dial.

COFFEE READY

Please note: If you inadvertently opened the lid for the coffee funnel, just close it. The Z5 will detect that there is no coffee in the funnel. The display will show PRE-GROUND NOT ENOUGH and will return to COFFEE READY.

Please note: After use of sugar coated or flavored coffee through the pre-ground coffee funnel you may experience some flavor transfer when switching back to your regular coffee. Select

the program RINSE UNIT in the maintenance section to run some hot water through the coffee spouts (chapter 26.1)

21. USING HOT WATER

The Z5 can produce up to 16 oz. of hot water. This is great if you want to produce a hot cup of tea or instant soup or if you want to add some hot water to your coffee.

COFFEE READY

Place a cup underneath the Hot Water Spout (Fig. 1,6)

Push the Hot Water Button (Fig.3). The display shows HOT WATER PORTION.

The pre-set is 6 oz. You can change the hot water volume during brewing by turning the Rotary Dial. You can always stop the hot water output by pushing any of the beverage buttons.

22. WATER CARE

Water is heated inside the Z5. With use, this leads to calcium deposits forming inside the machine. With the Z5 you have the following options to take care of the water:

Most convenient: Clearyl Water Filter Cartridge (chapter 23).

Least expensive: Decalcifying System (chapter 24 and 29). Your Z5 is pre-set in the factory to automatically remind you to decalcify based on a water hardness of 10º DH = 13 grains. You can change the water hardness setting to comply with the water you are using (chapter 24).

Please note: The Z5 will automatically remind you when it is necessary to run certain water maintenance programs. It is important that you follow those instructions. Otherwise your Z5 might break down.

19.

Image 19 Contents
Impressa Z5 Important Safeguards Jura-Capresso LLC Customer ServiceUsed Coffee Container Tray F F E E R E a D Y Gap Milk Coffee Nozzle Nozzle Milk & Froth Page Table of Contents 2-Cup Buttons Special Cup Button Product Warranty Registration 3b. Different Coffee Drinks PLEASE, DON’T... or you void your warranty protection3c. Coffee Facts PLEASE, do Factory SettingsPreparing the Machine for the First Time Welcome to Jura Unit is Heating Press Rinse 6c. Turning the Machine onCoffee Ready Brewing Coffee and Espresso Adjusting the GrinderDaily Preparation ONE-TOUCH Beverage Buttons Fig Auto Cappuccino System Overriding Strength and CUP Size During BrewingMilk 15 SEC Overriding the Cappuccino SettingsCappuccino and Latte CappuccinoSpecial Coffee Button Coffee Ready HOT Milk and HOT ChocolateCappuccino Rinsing Cycle Cappu Rinse Water for Cappuccino Press Button Cappuccino Cleaning CycleCleaner for Cappuccino Press Button Cleaning the Dial ComponentUsing HOT Water Using PRE-GROUND CoffeeWater Care Cartridge Clearyl Water Filter CartridgeFilter no Water Hardness Monitor Push the Rinse Button. Insert Filter Press ButtonConfirmed Coffee Ready 24a. Changing the Water Hardness MonitorFilter Changing PRE-SET CUP SizesEnough Water Press Button Enough Milk Press ButtonClean Unit Cappuccino Rinsing Maintenance ProgramsMaintenance Rinse Unit Cappuccino CleaningCoffee Strength / Aroma TemperatureChanging the temperature TemperatureSave Level Energy Saving Settings The factory setting is Save noMilk Programming Save noAUTO-OFF Save LevelActual Time AUTO-ONRenaming InformationLet’s change the 1 Espresso name to CUP of JOE Coffee Ready Fill Beans Empty Coffee Grounds Tablet Cleaning ProcessCoffee Ready Clean Bean Cover MissingGrounds Empty Decalcifying ProcessEmptying System Before Transport Height adjustable coffee-spoutTips for Better Coffee Pre-warm cups Grinder Makes AN Extremely Loud Noise no Beans are Ground Trouble ShootingOld beans Insufficient Frothed Milk Production Make sureError 6, Error 7, Error Error MessagesError 1, Error 3, Error 4, Error ErrorOther limitations and exclusions Limited WarrantyJura-Capresso, LLC