Jura Capresso 65349R3 warranty Cappuccino Cleaning Cycle, Cleaner for Cappuccino Press Button

Page 18

Please note: When you are finished using the cappuccino feature for the day please proceed as follows:

a. Remove the Thermal Milk container and place in the refrigerator. b. Remove the flexible hose on both ends and clean with hot water. c. Pull off the Dial component and the Dual Nozzle and rinse

under warm water.

18. CAPPUCCINO CLEANING CYCLE

Milk contains fatty acids. Hot water alone may not always remove milk fats completely. If you use the cappuccino feature frequently or if you use the Z5 for commercial purposes we highly recommend to perform this cleaning cycle daily. It will take less than two minutes.

Please note: the Z5 will not prompt you to run this special cycle. You need to activate the cycle through the maintenance menu.

One bottle of the solution is enclosed with your Z5. It will last for approximately 20 cleaning cycles. For additional supplies see chapter 34.

COFFEE READY

•Fill a container with approx. 6 oz. of water and add one cap of the Cappuccino Cleaner (15ML or 1/2 oz.).

•Connect the long hose to the Dial component and insert the other end into the container with the cleaning liquid (Fig. 15). Make sure that the Dial points to the Latte or Frothing position (not the steaming position!) (Fig. 5f).

•Place a container which can hold at least 12 oz. under the Dual Nozzle System.

•Push and hold the Rotary Dial until you hear a beep. The display shows FILTER.

•Turn the Rotary Dial until the display shows MAINTENANCE.

•Push the Rotary Dial to confirm that you want to go into the

MAINTENANCE section.

•Turn the Rotary Dial. It will offer you a choice of the following maintenance programs:

RINSE UNIT CAPPUCCINO CLEANING CLEAN UNIT CAPPUCCINO RINSING DECALCIFY UNIT

EXIT

•Select CAPPUCCINO CLEANING and push the Rotary Dial. The Rinse Button will illuminate.

CLEANER FOR CAPPUCCINO PRESS BUTTON.

•Since we have added the cleaner already, Press the Rinse Button. The Z5 will siphon the cleaning solution through the Milk Nozzle. It will run two short cycles and it will stop.

WATER FOR CAPPUCCINO PRESS BUTTON.

•Remove the container with the cleaning solution and fill with fresh clean water (about 6 oz.)

•Replace and insert the hose.

The rinse button illuminates. Press the Rinse Button.

The Z5 will run one short fresh water cycle through the Milk Nozzle and the display will return to COFFEE READY.

19. CLEANING THE DIAL COMPONENT

We recommend to regularly disassemble the Dial Component and rinse under warm water (Fig. 5a).

Make sure the venting tip (Fig. 5a) is always clean and free of milk deposits.

NOTE: Should you lose the venting tip, you will find a spare one included in the Welcome Pack.

18.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Impressa Z5 Important Safeguards Customer Service Jura-Capresso LLCUsed Coffee Container Tray F F E E R E a D Y Gap Milk Coffee Nozzle Nozzle Milk & Froth Page Table of Contents 2-Cup Buttons Special Cup Button Product Warranty Registration PLEASE, DON’T... or you void your warranty protection 3b. Different Coffee Drinks3c. Coffee Facts Factory Settings PLEASE, doPreparing the Machine for the First Time 6c. Turning the Machine on Welcome to Jura Unit is Heating Press RinseCoffee Ready ONE-TOUCH Beverage Buttons Fig Adjusting the GrinderDaily Preparation Brewing Coffee and EspressoOverriding Strength and CUP Size During Brewing Auto Cappuccino SystemCappuccino Overriding the Cappuccino SettingsCappuccino and Latte Milk 15 SECHOT Milk and HOT Chocolate Special Coffee Button Coffee ReadyCappuccino Rinsing Cycle Cappu Rinse Cleaning the Dial Component Cappuccino Cleaning CycleCleaner for Cappuccino Press Button Water for Cappuccino Press ButtonUsing PRE-GROUND Coffee Using HOT WaterWater Care Clearyl Water Filter Cartridge CartridgeFilter no Push the Rinse Button. Insert Filter Press Button Water Hardness MonitorChanging PRE-SET CUP Sizes 24a. Changing the Water Hardness MonitorFilter Confirmed Coffee ReadyEnough Milk Press Button Enough Water Press ButtonRinse Unit Cappuccino Cleaning Maintenance ProgramsMaintenance Clean Unit Cappuccino RinsingTemperature TemperatureChanging the temperature Coffee Strength / AromaSave no Energy Saving Settings The factory setting is Save noMilk Programming Save LevelAUTO-ON Save LevelActual Time AUTO-OFFInformation RenamingLet’s change the 1 Espresso name to CUP of JOE Coffee Ready Fill Beans Bean Cover Missing Tablet Cleaning ProcessCoffee Ready Clean Empty Coffee GroundsDecalcifying Process Grounds EmptyHeight adjustable coffee-spout Emptying System Before TransportTips for Better Coffee Pre-warm cups Insufficient Frothed Milk Production Make sure Trouble ShootingOld beans Grinder Makes AN Extremely Loud Noise no Beans are GroundError Error MessagesError 1, Error 3, Error 4, Error Error 6, Error 7, ErrorLimited Warranty Other limitations and exclusionsJura-Capresso, LLC

65349R3 specifications

The Jura Capresso 65349R3 is a high-end coffee machine designed for enthusiasts who appreciate quality and convenience. With its sleek design and robust features, this machine is a favorite among coffee lovers looking to create café-quality espresso at home.

One of the main features of the Jura Capresso 65349R3 is its innovative brewing system. Equipped with a high-performance pump, it can reach a pressure of 15 bars, which is essential for extracting the rich flavors and aromas from coffee grounds. This ensures that every shot of espresso is brewed to perfection, delivering a full-bodied taste that rivals professional machines.

The machine comes with an integrated conical burr grinder that allows users to grind fresh coffee beans right before brewing. This not only maximizes the flavor but also ensures the coffee retains its freshness. Users can customize the grind settings to suit their taste preferences, ranging from fine for espresso to coarse for other coffee styles.

One of the standout technologies in the Jura Capresso 65349R3 is the Intelligent Pre-Brew Aroma System. This feature moistens the coffee grounds before brewing, allowing for optimal flavor extraction. Additionally, the machine is equipped with a programmable coffee strength selector, enabling users to choose their desired intensity from mild to strong.

The brewing unit is easily removable, making cleaning and maintenance a breeze. This is complemented by the automatic rinsing and cleaning program, which ensures the machine remains in top condition with minimal effort. The water reservoir also has a generous capacity, reducing the need for frequent refills.

Another key characteristic of the Jura Capresso 65349R3 is its user-friendly interface. The intuitive control panel features a clear display that guides users through the brewing process, making it suitable for both beginners and seasoned baristas. Furthermore, the machine offers various drink options, including espresso, cappuccino, and latte macchiato, all at the touch of a button.

The Jura Capresso 65349R3 also prioritizes energy efficiency, featuring an energy-saving mode that reduces power consumption when not in use. This not only benefits the environment but also helps users save on electricity bills.

In summary, the Jura Capresso 65349R3 is a versatile and technologically advanced coffee machine that combines aesthetics with functionality. Its superior brewing capabilities, customizable features, and ease of use make it an excellent choice for anyone looking to elevate their coffee experience at home.
Top Page Image Contents