STEP 2 : CABINET ASSEMBLY CONTINUED
1
2
Open Box VP5 or VP2.
Insert Cam Pins (F) in BACK PANEL’S predrilled holes down to TAB. (May require some force)
Attach SIDES to Back/Bottom/Top by CAREFULLY aligning edge holes over Cam Pins and gently push together to avoid damaging cam pins. DO NOT BANG OR SLAP PANELS
TOGETHER!!!
Insert Cam, push all the way in under panel level (may require some force) and make sure Arrow points to outside edge., Push Panels together before tightening Cam, use allen key provided or #3 phillips screwdriver. Start with cams at
TOP !!!
F
2 HOLES FOR MODEL 250
3 HOLES FOR MODEL 500
BOTTOM | PANEL |
|
3
Insert Cam Cap (A) in all Cam Holes.
3
A
����
~6~