Nuvo 250, 500 operation manual HINGE,BASE and Legs Installation, Base, HEX Bolts

STEP 3 : HINGE,BASE AND LEGS INSTALLATION

	Open Box VP3.
1	Fasten one HINGE (found in
	door box) to the SIDE of the

cabinet H

2Install four LEGS (H) into BASES fully in.

3	Fasten FRONT	BASE	to
	the BOTTOM of	the cabinet
	(FRONT BASE has to be set
	with end tabs away from front
	edge)
4	Fasten BASE with	HEX BOLTS
	(B)

1

4

NOTE: Fasten base with base tab away from the front edge, then fasten and adjust the hinge before fully tightening HEX BOLTS (B)

2

H

H

B

3

D 1

5

5Raise cabinet and check for potential air

~7~ leaks at panel joints from inside.