Stoelting O111 owner manual Drive belt, Slipping or, Squealing, Rear auger seal, Leaks, Front door

Page 26

4.3 Troubleshooting Charts - continued

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

Drive belt

1. Worn drive belt.

1. Replace drive belt.

slipping or

2. Freeze-up (Auger will not turn).

2. Turn CLEAN-OFF-ON switch to OFF

squealing.

 

(middle) position for 15 minutes, then

 

 

restart.

Low overrun. 1. Auger is assembled wrong.

2.Mix inlet regulator missing.

3.Mix inlet regulator o-ring missing.

4.Mix inlet regulator air tube blocked.

5.Product breakdown.

1.Remove mix, clean, sanitize, and freeze down with fresh mix.

2.Replace mix inlet regulator.

3.Replace mix inlet regulator o-ring.

4.Clean with sanitized brush.

5.Fill freezer with fresh product.

Rear auger seal

1. Outside surface of rear auger seal

1. Clean lubricant from outside of rear seal,

leaks.

 

is lubricated.

 

lubricate inside of seal and reinstall.

 

2.

Rear seal missing or damaged.

2.

Check or replace.

 

3.

Seal o-ring missing, damaged or

3.

Check or replace

 

 

installed incorrectly.

 

 

 

4.

Worn or scratched shaft.

4.

Replace shaft.

 

 

 

Front door

1. Front door knobs are loose.

1. Tighten knobs.

leaks.

2. Spigot parts are not lubricated.

2.

See Section 3.

 

3.

Chipped or worn spigot o-rings.

3.

Replace o-rings.

 

4.

O-rings or spigot installed wrong.

4.

Remove spigot and check o-ring.

 

5.

Inner spigot hole in front door

5.

Replace front door.

 

 

nicked or scratched.

 

 

 

 

 

Hopper will not

1. Hopper temperature set too warm.

1. Call distributor for service.

maintain mix

2. Refrigeration problem.

2.

Call distributor for service.

temperature

 

 

 

 

below 40°F (4°C).

20

Image 26
Contents O111 IntelliTec Models Page STOELTING, LLC Few Words About Safety Table of Contents List of Illustrations Section Description and Specifications DescriptionElectrical Model Optima Countermodel Gravity Freezer DimensionsWeight CoolingSTOELTING, INC Section Installation InstructionsSafety Precautions 502 Hwy Kiel, Wisconsin208/230V 3FREEZERINSTALLATIONShipment and Transit 115V 20 AmpOperating Controls and Indicators Section Initial Setup and OperationOPERATOR’S Safety Precautions Menu Navigation Buttons Dispense Rate AdjustersFront Door Safety Switch When sanitizing the freezer, refer to local sanitary regula SanitizingFreeze Down and Operation Sanitizing HopperMIX Information Cleaning the FreezerDisassembly of Freezer Parts Removing MIX from FreezerCleaning the Freezer Parts Wear LineAssembly of Freezer Sanitize Freezer and Freezer PartsCleaning and Sanitizing Information Routine CleaningPreventive Maintenance Important Differences Between Cleaning and SanitizingWeekly Additional InformationDaily Quarterly Product Consistency AdjustmentExtended Storage SEMI-ANNUALLYLocking OUT Control Panel 13 Product Consistency ControlPage Troubleshooting Section TroubleshootingError Codes Error Code MalfunctionAlternating Flashing Control Panel Lights Problem Possible Cause Remedy Slipping or Temperature Below 40F 4CDrive belt SquealingBRUSHES, DECALS, and Lubrication Section Replacement PartsHOW to Order Parts Part DescriptionO111 Replacement Parts Part Description Quantity Page Warranty Soft Serve / Shake Freezers AS is

O111 specifications

The Stoelting O111 is an advanced soft serve ice cream machine, designed for both high-volume production and unparalleled quality. This machine showcases a blend of efficiency, reliability, and user-friendly features, making it an ideal choice for ice cream parlors, restaurants, and catering services.

One of the main features of the Stoelting O111 is its high-capacity output, capable of producing a significant volume of soft serve in a short period. The machine is designed to handle busy environments, ensuring that customers receive their desserts quickly, which is essential during peak hours. It typically offers dual-flavor capabilities, allowing the simultaneous dispensing of two different ice cream flavors. This not only enhances customer choice but also provides the opportunity for creative mix-ins and swirls.

In terms of technology, the Stoelting O111 is equipped with a state-of-the-art refrigeration system that maintains optimal product consistency. This system includes a direct drive compressor, which ensures efficient cooling while minimizing energy consumption. The machine also features a temperature control panel that allows operators to adjust the serving temperature for different products, thereby enhancing the overall quality and texture of the soft serve.

Another standout characteristic of the Stoelting O111 is its intuitive digital controls. These controls provide operators with real-time monitoring of the machine’s performance, enabling them to make quick adjustments as necessary. The easy-to-read display shows information on the mix levels, temperature settings, and machine status, allowing for proactive maintenance and minimal downtime.

Moreover, the Stoelting O111 prioritizes hygiene and ease of cleaning. It features a removable mix hopper and dispensing nozzle, facilitating thorough cleaning procedures. This focus on maintenance aligns with health standards, ensuring that the soft serve produced remains safe and high-quality.

With its robust construction, user-friendly interface, and advanced technologies, the Stoelting O111 stands out as a reliable machine that caters to the demands of the modern food service industry. Whether it's for a busy ice cream shop or a special event, the Stoelting O111 delivers exceptional performance and superior soft serve, making it a valuable addition to any establishment.