Turbo Chef Technologies C3 W E R U P Initial Power On, To Power Up The Oven, Cooking Instructions

Page 15
MENU GROUP SELECT

P O W E R – U P

The Initial Power On

When power is initially applied, the oven START UP screen will display the firmware version and the oven’s serial number for 5 seconds (Figure 7). The OFF screen will then display “Oven Off” in large text (Figure 8).

OPERATION 11

4. When the oven cooking temperature is within 7ºF (4.8ºC) of the cook cavity set point temperature, the oven will display “Ready to Cook” and an audible alarm will sound. After approximately 1 second, the

screen will appear.

If the oven cavity temperature is in excess of 150ºF (65ºC), the screen will also display “Cool Down” and the blower motor will begin circulating cool air. An OVEN ON soft key is displayed on the lower right corner of the screen.

NOTE: After one hour in the OFF mode, the display goes to minimum intensity to prevent burn-in.

To Power Up The Oven

COOKING INSTRUCTIONS

NOTE: To enable/disable the START or DONE screens, see page 14.

NOTE: Press the BACK key at any time to return to the previous screen.

WARNING: The oven cavity and inside of door are HOT! Insert and remove food with caution.

1. If the display is dim, press any key to re-illuminate the display. The OFF screen will be displayed (Figure 8).

2. Press the OVEN ON soft key to turn the oven on and begin warm up.

3. The WARM UP screen will display “Warming Up” (or in some cases “Cooling Down”), the cook cavity temperature (CC) and heater temperature (HX) (Figure 9).

1. Place the food product into the oven cavity.

The MENU GROUP SELECT screen (Figure 10) displays eight menu groups - each associated with the eight soft keys. Press the soft key corresponding to the desired menu group to advance to the MENU ITEM SELECT Screen (Figure 11).

NOTE: To assign new names to the menu groups and items, see “Editing a Food Item” (page 13).

V2C3_64 091505 S/N C3-XXXXX MENU LOADING...

C3-XXXXX

OVEN OFF

COOLING DOWN

AC VOLTS 240

OVEN

ON

WARMING UP

CC321O F HX335OF

F I G U R E 7: Start Up Screen

F I G U R E 8: Off Screen

F I G U R E 9: Warming Up Screen

Image 15
Contents Accelerating the World of Cooking TM Page For service or information call Installing or servicing this equipment Table of Contents Introduction Important Safety InstructionsPower Supply Cord Replacement Grounding InstructionsRF Interference Considerations Specifications Oven Description and SpecificationsDelivery and Location InstallationInstallation Ventilation RequirementsC3 Oven Assembly Oven Assembly and Ceramic Platter InstallationDouble Stacking Ovens Built-In Installation G U R E 5 Installation Near Open Heat Source Modes OperationGlossary of Terms Product RecipesControl PAD W E R U P Initial Power On To Power Up The OvenCooking Instructions Turning the Oven OFF 0030Editing a Food Item DoneDone Screen ENABLING/DISABLING the Edit ModeCooking Options Start and Done Screens Start ScreenSaving a Menu to a Smart Card Loading a Menu from a Smart CardDo Not How to Develop Cook SettingsOperating Tips Handling TipsCleaning MaintenanceRemoving Components for Cleaning TroubleshootingO B L E M a R E a F4 Monitor Catalytic Converter Limited Warranty I N T E N a N C E23 Disclaimer Limited WarrantyTurbochef Global Warranty System Warranty ServiceI N T E N a N C E Page Page For service or information