Pitco Frialator L20-293 operation manual To the PURCHASER, Owner and Store Manager

Page 2

TO THE PURCHASER, OWNER AND STORE MANAGER

Please review these warnings prior to posting them in a prominent location for reference.

WARNING

DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WARNING

Improper installation, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this appliance.

WARNING

Installation, maintenance and repairs should be performed by a Pitco Authorized Service and Parts (ASAP) company technician or other qualified personnel. Installation, maintenance or repairs by an unauthorized and unqualified personnel will void the warranty.

WARNING

Installation and all connections must be made according to national and local regulations and codes in force.

WARNING

A country approved all pole circuit breaker with a minimum open contact gap of 3mm must be used for proper installation. (CE countries)

WARNING

During the warranty period if a customer elects to use

anon-original part or modifies an original part purchased from Pitco and/or its Authorized Service and Parts (ASAP) companies, this warranty will be void. In addition, Pitco and its affiliates will not be liable for any claims, damages or expenses incurred by the customer which arises directly or indirectly, in whole or in part, due to the installation of any modified part and/or received from an unauthorized service center.

WARNING

This appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable.

WARNING

Adequate means must be provided to LIMIT the movement or this appliance without depending on the electrical cord connection. Single appliances equipped with legs must be stabilized by installing anchor straps. All appliances equipped with casters must be stabilized by installing restraining chains.

WARNING

DO NOT alter or remove structural material on the appliance to accommodate placement under a ventilation hood.

WARNING

This appliance is intended for professional use only and should be operated by fully trained and qualified personnel.

WARNING

If the supplied power cord is damaged, it must be replaced by a Pitco Authorized Service and Parts (ASAP) company technician, or a similarly qualified person in order to avoid a hazard.

WARNING

The power supply must be disconnected before servicing, maintaining or cleaning this appliance.

WARNING

The appliance is NOT jet stream approved. DO NOT clean the appliance with a water jet.

WARNING

DO NOT attempt to move this appliance or transfer hot liquids from one container to another when the unit is at operating temperature or filled with hot liquids. Serious personal injury could result if skin comes in contact with the hot surfaces or liquids.

WARNING

DO NOT sit or stand on this appliance. The appliance’s front panel, tank, splash back, tank cover, workshelf, drain board is not a step. Serious injury could result from slipping, falling or contact with hot liquids.

WARNING

NEVER use the appliance as a step for cleaning or accessing the ventilation hood. Serious injury could result from slips, trips or from contacting hot liquids.

WARNING

The water level should be maintained at the level line. DO NOT turn the appliance on until the heating elements are fully covered with water at all times. Serious injury could result from hot steam vapors off the heating element.

WARNING

If overflow drain is not equipped or if overflow drain stop is used, do not leave appliance unattended while filling with water. Over filling the appliance can cause serious injuries and damage the equipment.

WARNING

Completely shut the appliance down when the water is being drained from the appliance. This will prevent the appliance from heating up during the draining and filling process. Serious injury and heating element damage can occur.

WARNING

This appliance is intended for indoor use only.

WARNING

DO NOT operate appliance unless all panels and access covers are attached correctly.

WARNING

It is recommended that this appliance be inspected by a qualified service technician for proper performance and operation on a yearly basis.

ii

L20-293, rev. 0 (1/06)

Page 1 Page 3
Image 2
Page 1 Page 3
Contents English To the PURCHASER, Owner and Store Manager Table of Contents Table of Contents TroubleshootingChecking Your NEW Appliance InstallationAccessories Installation Clearances LEG/CASTER Installation and LevelingPlumbing Connections Water Quality ChecklistVoltage/Phase Amps Electrical ConnectionsVentilation and Fire Safety Systems Ground ConnectionInspection InstallationInitial Cleaning Operational Features OperationCook Tank High Temperature Reset ButtonBoil/Simmer Switch Drain OutletModel Capacity Filling the ApplianceTank Capacity PE14DAppliance Start UP Simmer ModeTo enter simmer mode CookingAppliance Shutdown Do not leave the appliance unattended during cleaning Preventative MaintenanceDaily Preventative Maintenance Appliance InspectionTemperature Probe & High Limit Probe Heating ElementPreventative Maintenance Power Failure Drain Valve InterlockProblem Probable Causes Corrective Actions TroubleshootingTroubleshooting Chart Display Problem ActionL20-293, rev 1/06

L20-293 specifications

The Pitco Frialator L20-293 is a powerful and versatile commercial deep fryer designed to meet the demands of high-volume frying in various food service settings. Known for its reliable performance, the L20-293 is ideal for restaurants, food trucks, and catering services that require consistent cooking results and efficiency.

One of the key features of the Pitco L20-293 is its impressive oil capacity, which allows operators to fry large batches of food without the need for constant oil replenishment. With a 40-pound oil capacity, this fryer is capable of handling a wide range of menu items, from crispy French fries to golden-brown chicken. The large tank not only increases productivity but also allows for better oil temperature maintenance, ensuring that food is cooked evenly and to perfection.

This model leverages advanced heat transfer technology, incorporating a patented "Front-Edge" design. This innovative heating system uses a combination of open tank and a baffle system to create a more efficient heating process. The design not only reduces oil degradation but also enhances cooking efficiency, which is crucial in busy kitchens where time is of the essence.

Another noteworthy feature is the adjustable temperature control, which provides precise temperature management up to 375°F. This flexibility allows chefs to experiment with different cooking techniques and optimize fry quality for various food types. Additionally, the fryer is equipped with a built-in filtration system, which extends the life of the oil by removing food particles, thus saving on oil costs and improving overall food quality.

Safety is also a priority in the design of the L20-293. The fryer includes various safety features such as a high-temperature shut-off, which prevents overheating, and an easy-to-use basket lift system that reduces the risk of burns during operation. The stainless steel construction ensures durability and easy cleaning, making maintenance more manageable in fast-paced environments.

Overall, the Pitco Frialator L20-293 is a top-tier choice for commercial kitchens. With its large capacity, efficient heating technology, precise controls, and safety features, it not only meets but exceeds the demands of modern food service operations. Operators can expect consistent and high-quality frying results, making it a valuable investment for any food business looking to enhance their frying capabilities.
Top Page Image Contents