Setting the Clock
Setting Continuous Bake or 12 Hour Energy Saving
TimerFlex
The Set/Offand Cleanpads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset
INSTRUCTIONS | PRESS | DISPLAY |
To set the control far Continuous Bake or 12 Hour Energy
Saving features
Timer
1.Press and hold Set/Offfor 7 seconds (Fig. 1). After 7 seconds "12Hr OFF" or "STAY On" will appear in the display and the control will
beep once (Fig 2 or 3).
Flex
2.Press Cleo0to switch between the 12 Hour Energy Saving and continuous bake features. Note: "12Hr OFF" (Fig. 2) in the display indicates the control is set for the 12 Hour Energy Saving mode and "STAY On" indicates the control is set for the Continuous Bake feature (Fig. 3).
. Press @ to accept the change (Fig. 4; display will return to time
of day) or press @ to reject the change.
Setting Kitchen Timer
Timer
Timer
Set/Offfor 7 seconds
Fig. 1
Flex
Clean
| Fig. | 2 |
or | Fig. 3 |
@
Fig. 4
The Set/Offpad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions_ except during a
for | time amount | settings. |
|
|
|
|
|
| ||
|
|
|
| INSTRUCTIONS |
| PRESS | DISPLAY | |||
To | set the Kitchen | Timer | (example: | 5 mlnufes) |
|
|
| |||
1. | Timer |
| 5). |
|
|
|
|
|
| |
Press Set/Off(Fig. |
|
|
|
| Timer |
| ||||
|
|
|
|
|
|
|
|
| Set/Off |
|
2. | Press the | number | pads | to set | the | desired time | in the | display | Fig. 5 | |
|
|
|
|
|
|
|
|
|
| |
| (example | 5). | Press _. | The | time | will begin to | count | down in the |
|
display (Fig. 6). Note: If _ is not pressed the timer will return to the time of day after 30 seconds.
3.When the set time has run out° "End" and "TIMER" wiii show in
the display (Fig. 7). The clock wiii sound with 3 beeps every 7
Timer
seconds until Set/Offis pressed.
To cancel the Kitchen Timer before the set tlme has run out
Timer
Press Set/Off. The display will return to the time of day.
5@
Fig. 6
Timer
Set/Off
Fig. 7
To Set Acid I Minute Feature
Add I | Add 1 |
The Minutepad is used to set the Add 1 Minute feature. When the Minutepad is pressed_ 1 minute is added to the Minute Timer
Add 1
feature if this feature is already active. If the Minute Timer feature is not active and the Minutepad is pressed_ the Minute Timer feature will become active and will begin counting down from 1 minute. For further information on how to set the Minute Timer feature see To Set the Minute Timer instructions above.
14