Setting Oven Controls
To Set the Recipe Recall Feature
This feature will ONLY recall a Bake, Convection Bake, Cakes, Breads, Convection roast, Slow Cook, Cook Time or a Cook Time with a Warm & Hold added setting. This feature will not work with any other function including a Delay Start, a Clean Cycle or a Broil setting.
iNSTRUCTiONS
To Program the Oven to Begin Baking immediately and record
a Recipe (example: for a Bake mode at 425°C)
1.Place the food in the oven.
Lower
2.Press Oven.
3.Press _ (Fig. 1).
4.Press 4 2 5 (Fig. 2).
5.Press and hold _ pad for at least 3 seconds or until a beep sounds. The beep indicates that this recipe has been recorded for future recall.
To Program the Oven to Begin Baking with a stored Recipe
1.Place the food in the oven.
2.Press _ and then _ (Fig. 2).
3.The Temperature (and the cool< time, if programmed) is recalled, the oven will begin immediately to cool< with the previously recorded recipe.
PRESSDISPLAY
Lower | Fig. 1 |
Oven |
|
425
for 3 seconds. | Fig. 2 |
|
_and then @
Restoring | factory default | settings |
|
|
|
|
|
|
| |
When new_ your | appliance left | the factory | with | predetermined | oven control | setting. | Over | time, the user may make | changes | |
to these settings. | The following | options have | user | preferences | that could be | modified | and | may have been changed | since the | |
appliance | was new: |
|
|
|
|
|
|
|
|
•12 or 24 hour display mode;
•Continuous bake or
•Silent or audible control;
•Oven temperature display (Fahrenheit or Celsius);
•Oven temperature adjustment;
•Any stored recipes;
•Accent Light brightness setting.
Please remember the if you choose to restore, ALL of the above preferences will be restored to factory default settings, the oven temperature offset will reset and any stored information will be cleared.
1.Press and hold 7 keypad until one beep sounds (about 6 seconds).
2.Press @.
29