Kenmore 790.7892 manual Setting Temperature Display- Fahrenheit or Celsius, Setting Accent Light

Page 16

Consumer Defined Control

Setting Temperature Display- Fahrenheit or Celsius

Flex

The _ and Cleanpads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed

to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens wiJJ be changed at the same time.

iNSTRUCTiONS

To change display from Fahrenheit to Celsius or Celsius to

Fahrenheit

1.Press _ and hold for 7 seconds. A beep will sound, "550" will appear "BROIL" will flash in the display (Fig. 1). After 7 seconds a beep will be heard and "F" (Fig. 2) or "C" (Fig. 3) will appear in the display.

If "F" appears, the display is set to show temperatures in Fahrenheit (Fig. 2). If "C" appears, the display is set to show

temperatures in Celsius (Fig. 3).

Flex

. Press aeonto switch between Fahrenheit or Celsius display modes. The display wiii show either "F" (Fig. 2) or "C" (Fig. 3).

3. Press _(_ to accept the change or press _ to reject the change.

PRESSDISPLAY

_for

7seconds

Fig. 1

 

Fig. 2

Flex

 

Clean

Fig. 3

_ or

Setting Accent Light

Your range includes a decorative Accent Light located across the touch-sensitive control panel. The Accent light comes with a theatre style intensity feature that slowly increases brightness at turn on and slowly fades when turning off.

When the Accent light is off, the light is in automatic mode. This means the Accent light will turn on automatically when an

oven or Timer has been activated. The Accent light will turn off automatically when these functions are no longer active.

Accent

When the Accent light is OFF, it may be turned ON by pressing Light once. When the Accent light has been manually turned

Accent

on, it will remain on until manually turned off by pressing Light again. The brightness may also be adjusted.

INSTRUCTIONS

Example - To adjust the Accent light brightness:

PRESSDISPLAY

Accent

1.Press and hold Light until an acceptance tone sounds (about 6 seconds)

2.The default setting of 100 will appear in the display (See Fig. 4).

3.Using the numeric keypad, enter any digit from 0 to ]00 to change the brightness level. Entering 0 (Fig. 5) will effectively

turn the Accent light OFF until the brightness level is adjusted to a higher level.

4.Press _ to save the desired brightness setting.

Operating Oven Lights

Accent

Light

Value between

0 to 100

@

Fig. 4

Fig. 5

The interior oven lights will turn ON when the oven door is opened.

Press _ to turn oven light ON an OFF whenever the oven door is closed.

The interior oven lights are located on the rear wall of the oven interior and are covered with a glass shield. The glass shield protects the bulb from high temperatures and should always be in place whenever the oven is in use.

To replace the interior oven lights, see Replaclng oven fights in the Care and Cleaning section.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Le more English / Espaol Models/Modelos 790.7890%Contents Service Must be performed InstallationQualified installer, servicer or the gas supplier UsingIMPORTANT Safety iNSTRUCTiONS IMPORTANT iNSTRUCTiONS for UsingUse Care When Opening an Oven Door--Stand Clean in the self-cleaning cycle only the partsGrounding instructions Conversion to Liquefied Petroleum Gas or L.R GasRange Features Your gas range includesBurner grates Locations of the Gas Surface BurnersFixed Burner Head Gas Opening Operating the Gas Surface Controls Seffing Proper Surface Burner Flame SizeManual Lighting Such as salt and pepper shakers, spoonSurface Cooking Oven Vent Location Rack SupportsAir Circulation in the Oven Arranging Oven Racks & SupportsMin MaxSetting the Clock Setting the ClockINSTRUCTiONS Changing between 12 or 24 hour time of day dlsplaySetting Continuous Bake or 12 Hour Energy Saving Saving featuresSetting Kitchen Timer To Set Acid I Minute FeatureSetting Oven Lockout Feature Setting Silent Control OperationTo activate the Oven Lockout feature Consumer Defined ControlSetting Temperature Display- Fahrenheit or Celsius Setting Accent LightExample To adjust the Accent light brightness Operating Oven LightsSetting Oven Controls To set the Preheat temperature for 350FTo change Preheat temperature while oven is preheating Seffing PreheatTemperature To set the Bake Temperature to 350F ×ample for lower ovenSet Bake Press OvenCausesCorrectlons Baking Problems and Solutions ChartCakes nat done INSTRUCTiONS To program the oven to begin baking immedlafely and to shutSet Delay Start 530Seffing Broil Upper Oven Only Broiling Times and Searing Grill if equippedTo set the oven to broil at 550F Setting the Food Categories Features 375Setting Convection Bake Lower Oven Only Air circulation during Convection BakeSetting Convection Convert feature Lower Oven Only Feature Setting the Slow Cook FeatureTo Program the Oven to begin baking with the Slow Cook To set Warm & Hold Setting the Warm & Hold TM FeatureTo set Warm & Hold to turn on automatically To Set the Sabbath CookTo Set the Recipe Recall Feature SettingsSelf-Cleaning Self-Cleaning OvenSelf-Cleaning To Start the Self=Clean CycleWhen the Self=Clean Cycle is Completed 200orSelf Cleaning Adjusting Oven TemperatureSelf-Cleanlng Cyde To stop or interruptOven Door Oven RacksYou may Porcelain Enamel Cooktop Cleaning instructions Cornmerclal oven cleaners onDo not use CooktopAn interior oven ChangingTo replace the light bulb Solutions to Common Problems Installation. Range notOven Control IsdisplayedSelf-cleanlng cycle does not Page Protection Agreements Master Protection AgreementsOur Home Your HomeWww,sears,com www,sears,ca
Top Page Image Contents