Kenmore 7290 Oven Control Functions, Setting Oven Controls, Oven control keypads, Setting Clock

Page 11

Oven Control Functions

For satisfactory use of your oven, become familiar with the various key pad functions and features of the oven.

1

2

3

 

10

11

12

 

 

 

 

 

7

10

13

 

 

 

 

8

 

 

 

 

 

 

 

4

5

6

9

 

 

 

 

 

 

14

Function indicator lights - These lights located above the functions will glow when the function is active.

Oven control keypads

1.Oven Light - Use to turn the oven lights ON and OFF.

2.Clock - Use to set the time of day.

3.Cook Time - Use to enter length of cook time desired.

4.Select Clean - Use to set a 2, 3 or 4 hour self-clean cycle.

5.Timer Set/Off - Use to set or cancel Timer.

6.Delay Start - Use with Bake and Select Clean functions to program a delay start time or delay start self-cleaning cycle.

7.OVEN indicator light - The OVEN light will glow each time the oven turns on to maintain the set oven temperature.

8.PREHEAT indicator light - The PREHEAT light will glow when the oven is first set for cooking and remain on until the oven reaches the set temperature.

9.DOOR LOCKED indicator light - The DOOR LOCKED light will glow when the oven door locks or unlocks, oven lockout is active or when Select Clean is active.

10.Up / Down arrow key pads - Use with function keypads to accept settings and to adjust temperature and times.

11.Bake - Use to select Bake function.

12.Broil - Use to select variable Broil function.

13.STOP - Use to cancel any oven mode previously entered except clock and timer. Press STOP to stop cooking. Use to activate or cancel OVEN LOCKOUT.

14.Warm & Hold - Use to set Warm & Hold feature.

Setting Oven Controls

Setting Clock

When the appliance is first powered up or when the power supply to the appliance has been interrupted, 12:00 will flash in the display (See Fig. 1). The time of day must first be set before operating the oven.

To set the clock:

1.Press key pad once (do not hold key pad down).

2.Within 5 seconds, press and continue pressing the

or key pad until the correct time of day appears in the display. Release key pad.

Important note:

The time of day cannot be changed when the oven is set for cooking or when Select Clean is active.

Setting silent or audible control mode

The oven control is factory preset with audible tones active. The control may be programmed for silent operation or with normal audible tones.

To block the controls from sounding when any key pad is pressed, press and hold Delay Start key pad until the control beeps once (about 6 seconds).

To return to the audible control mode, press and hold Delay Start key pad until the control beeps once (about 6 seconds).

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Use & Care Guide Guía de uso y cuidada KenmoreKenmore Limited Warranty Table of ContentsSave these instructions for future reference Read all instructions before using this applianceTip Over Hazard Important Instructions for Using Your Oven Important safety notice Important Instructions for Using Your CooktopConversion to L.P. Gas Product RecordSerial Plate Location Grounding InstructionsAir circulation in the oven Before Setting Oven ControlsOven vent location Types of oven racksBurner head Before Setting Surface ControlsInstalling burner grates RememberFlame size Type of cooking Using proper cookwareSetting proper burner flame size Cookware material typesHome canning Setting Surface ControlsSetting surface burners Oven Control Functions Setting Oven ControlsSetting Clock Setting silent or audible control modeSetting Timer Changing temperature display F or COven Lockout Setting BakeUntil is pressed Setting Cook TimeWhen the cook time runs out Operating oven light Setting Delay StartBaking Benefits of convection cookingHow convection works To set Convection on some modelsTo set Broil Suggested broil settings table gas ovenBroil Warm & Hold Adjusting Oven TemperatureTo add Warm & Hold when baking with Cook Time To adjust oven temperatureStorage in or on appliance-flammable Warmer drawer recommended settingsWarmer drawer recommended food settings Food Item Setting To set warmer drawer Warmer drawer indicator lightSetting warmer drawer Flex Clean can not be set when the warmer drawer is activeTo set Select Clean to start immediately Select CleanRead before starting Select Clean Setting Select CleanTo start a Delay Start Select Clean Delayed Start Select CleanWhen Select Clean is finished Cleaning recommendation table Care & CleaningCleaning surface burner heads Cleaning recessed and contoured areas of cooktopCleaning surface burner grates Cleaning burner capsGlass WireAluminum foil and utensils Replacing oven light some modelsTo replace oven door Removing and replacing the lift-off oven doorSpecial door care instructions To remove oven doorProblem Solution Searing Be sure oven door closed when broilingRunning Select Clean cycle SectionSurface burners do not ignite Surface burners in the Care & Cleaning sectionCooktop and surface burners in the Care & Cleaning section Unavoidable due to salt content in airProtection Agreements Acuerodes de protección
Top Page Image Contents