Kenmore 7280, 7271, 7250, 7290 manual Delayed Start Select Clean, When Select Clean is finished

Page 22

Select Clean

When Select Clean begins the cleaning cycle, the motorized door latch mechanism will automatically start to lock the oven door and the DOOR LOCKED indicator light will flash. DO NOT open the oven door when the DOOR LOCKED indicator light is flashing. Allow about 15 seconds for the oven door to completely lock.

Once the oven door has locked the DOOR LOCKED indicator light will glow steady. When CLn will appears in the display Select Clean is active.

Use caution when opening the oven door after self-cleaning. The oven may still be VERY HOT and can cause burns. To avoid possible burns stand to the side of the oven when opening the oven door to allow hot air or steam to escape.

When Select Clean is finished:

1.The time of day will appear in the display window and the Select Clean and DOOR LOCKED indicator lights will continue to glow.

2.Once the oven has cooled down (about 1 hour) and the DOOR LOCKED indicator light has turned off the oven door may be opened.

3.When the oven interior has completely cooled, wipe away any residue or powdered ash with a damp cloth or paper towel.

Important notes:

•The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the 1st self-clean cycle. This will help eliminate the normal odors associated with the 1st self-clean cycle.

•DO NOT attempt to open the oven door when the DOOR LOCKED indicator light is flashing. Allow about 15 seconds for the motorized door latch mechanism to completely lock or unlock the oven door.

•When the clean time finishes the oven door will remain locked until the range has cooled sufficiently. In addition to the clean time that was programmed, you must allow about 1 additional hour for the oven to cool before you will be able to open the oven door.

•The Select Clean function will not operate whenever a radiant surface element is ON or the oven lockout is active.

Delayed Start Select Clean

To start a Delay Start Select Clean:

1.Be sure the oven is empty and ALL oven racks are removed. Remove all items from the cooktop. Be sure oven door is completely closed.

2.Be sure the clock shows the correct time of day.

3.Press Delay Start key pad.

4.Press and hold the key pad to scroll to the time to start the self-clean cycle. Release the key pad when the desired start time is displayed.

5.Press Select Clean key pad. — — — appears in the display.

6.Press or once. 3:00 appears in the display indicating the default 3 hour clean time is selected. To

select a 2 hour clean time press ; 2:00 appears in

the display. To select a 4 hour clean time press ; 4:00 appears in the display.

7.After selecting the clean time Select Clean is set to activate. The DOOR LOCKED indicator light will turn on and the oven door will lock in advance of the starting time. Once the starting time is reached CLn will appear in the display.

If it becomes necessary to stop Select Clean when active:

1.Press .

2.If Select Clean has heated the oven to a high temperature, allow enough time for the oven to cool and for the DOOR LOCKED indicator light to turn off. When this indicator light turns OFF the oven door may be opened.

3.Restart Select Clean if needed.

Important notes:

•If Select Clean is active and a power failure occurs, the oven may not have thoroughly cleaned. This would depend on how much cleaning time had elapsed before the power failure. If needed after power is restored, set Select Clean again.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Kenmore Use & Care Guide Guía de uso y cuidadaTable of Contents Kenmore Limited WarrantyTip Over Hazard Read all instructions before using this applianceSave these instructions for future reference Important Instructions for Using Your Oven Important Instructions for Using Your Cooktop Important safety noticeGrounding Instructions Product RecordSerial Plate Location Conversion to L.P. GasTypes of oven racks Before Setting Oven ControlsOven vent location Air circulation in the ovenRemember Before Setting Surface ControlsInstalling burner grates Burner headCookware material types Using proper cookwareSetting proper burner flame size Flame size Type of cookingSetting surface burners Setting Surface ControlsHome canning Setting silent or audible control mode Setting Oven ControlsSetting Clock Oven Control FunctionsChanging temperature display F or C Setting TimerSetting Bake Oven LockoutWhen the cook time runs out Setting Cook TimeUntil is pressed Setting Delay Start Operating oven lightTo set Convection on some models Benefits of convection cookingHow convection works BakingBroil Suggested broil settings table gas ovenTo set Broil To adjust oven temperature Adjusting Oven TemperatureTo add Warm & Hold when baking with Cook Time Warm & HoldWarmer drawer recommended food settings Food Item Setting Warmer drawer recommended settingsStorage in or on appliance-flammable Flex Clean can not be set when the warmer drawer is active Warmer drawer indicator lightSetting warmer drawer To set warmer drawerSetting Select Clean Select CleanRead before starting Select Clean To set Select Clean to start immediatelyWhen Select Clean is finished Delayed Start Select CleanTo start a Delay Start Select Clean Care & Cleaning Cleaning recommendation tableCleaning burner caps Cleaning recessed and contoured areas of cooktopCleaning surface burner grates Cleaning surface burner headsReplacing oven light some models WireAluminum foil and utensils GlassTo remove oven door Removing and replacing the lift-off oven doorSpecial door care instructions To replace oven doorProblem Solution Section Be sure oven door closed when broilingRunning Select Clean cycle SearingUnavoidable due to salt content in air Surface burners in the Care & Cleaning sectionCooktop and surface burners in the Care & Cleaning section Surface burners do not igniteProtection Agreements Acuerodes de protección
Top Page Image Contents