Kenmore 7271, 7250, 7280, 7290 manual Changing temperature display F or C, Setting Timer

Page 12

Setting Oven Controls

Changing temperature display (°F or °C)

The electronic oven control is set to display °F (Fahrenheit) when shipped from the factory. The display may be changed to show either Fahrenheit or Celsius oven temperatures.

To change temperature display mode from °F to °C (Celsius) or from °C to °F (Fahrenheit):

1.Press Broil key pad. — — appears in the display.

2.Press and hold until HI appears in display.

3.Press and hold Broil key pad until F or C appears in the display.

4.Press either or key pad to toggle between F (Fahrenheit) or C (Celsius) mode choices. Release key pad when desired mode is displayed.

5.To accept selection, press any control key pad once. The display will return to the time of day.

Important note:

The temperature display mode cannot be changed when the oven is set for cooking or Select Clean is active.

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a factory preset 12-Hour Energy Saving feature that will turn the oven off automatically if the oven is left on for more than 12 hours. The control may be programmed to override this feature to continuously bake.

To change to continuous bake mode:

Press and hold Timer Set/Off key pad until the control beeps once (about 6 seconds). - - hr will appear in display indicating the control is now set for continuous bake setting.

To change to 12-Hour Energy Saving feature:

Press and hold Timer Set/Off key pad until the control beeps once (about 6 seconds). 12hr will now appear in display indicating the control is set for 12-Hour Energy Saving feature.

Important note:

Changing between continuous bake or the 12-Hour Energy saving mode does not change how the cooktop controls operate.

Setting Timer

The timer allows you to track your cooking times without interfering with the cooking process. The timer may be set from 1 minute up to 11 hours and 59 minutes.

To set the timer:

1.Press Timer Set/Off key pad.

2.Press the to increase the time in one minute

increments. Press and hold to increase the time in

10 minute increments. Release when the desired time appears in the display. The timer will begin to count down.

3.When the set time has run out, the Timer will sound with 3 beeps and will continue to beep 3 times every 60 seconds until Timer Set/Off key pad is pressed.

To change time remaining in Timer:

While the timer is active, press and hold the or key pad to increase or decrease any time remaining.

To cancel the Timer before the set time has run out: Press Timer Set/Off key pad once.

Important notes:

•The timer does not start or stop the cooking process. It serves as an extra timer in the kitchen that will beep when the set time has run out. The timer may be used alone or when any other oven function is active.

•The indicator light located above the Timer Set/Off key pad will glow when the timer is active.

•The timer will display hours and minutes until 1 hour remains. When less than 1 hour remains, the display will count down in minutes and seconds. Once the timer has less than 1 minute remaining only seconds will display.

•If the timer is active when oven cooking, the minute timer will show in the display by default. To view information of any other active oven function, press the key pad once for the active function to view status.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Kenmore Use & Care Guide Guía de uso y cuidadaTable of Contents Kenmore Limited WarrantyRead all instructions before using this appliance Tip Over HazardSave these instructions for future reference Important Instructions for Using Your Oven Important Instructions for Using Your Cooktop Important safety noticeProduct Record Serial Plate LocationGrounding Instructions Conversion to L.P. GasBefore Setting Oven Controls Oven vent locationTypes of oven racks Air circulation in the ovenBefore Setting Surface Controls Installing burner gratesRemember Burner headUsing proper cookware Setting proper burner flame sizeCookware material types Flame size Type of cookingSetting Surface Controls Setting surface burnersHome canning Setting Oven Controls Setting ClockSetting silent or audible control mode Oven Control FunctionsChanging temperature display F or C Setting TimerSetting Bake Oven LockoutSetting Cook Time When the cook time runs outUntil is pressed Setting Delay Start Operating oven lightBenefits of convection cooking How convection worksTo set Convection on some models BakingSuggested broil settings table gas oven BroilTo set Broil Adjusting Oven Temperature To add Warm & Hold when baking with Cook TimeTo adjust oven temperature Warm & HoldWarmer drawer recommended settings Warmer drawer recommended food settings Food Item SettingStorage in or on appliance-flammable Warmer drawer indicator light Setting warmer drawerFlex Clean can not be set when the warmer drawer is active To set warmer drawerSelect Clean Read before starting Select CleanSetting Select Clean To set Select Clean to start immediatelyDelayed Start Select Clean When Select Clean is finishedTo start a Delay Start Select Clean Care & Cleaning Cleaning recommendation tableCleaning recessed and contoured areas of cooktop Cleaning surface burner gratesCleaning burner caps Cleaning surface burner headsWire Aluminum foil and utensilsReplacing oven light some models GlassRemoving and replacing the lift-off oven door Special door care instructionsTo remove oven door To replace oven doorProblem Solution Be sure oven door closed when broiling Running Select Clean cycleSection SearingSurface burners in the Care & Cleaning section Cooktop and surface burners in the Care & Cleaning sectionUnavoidable due to salt content in air Surface burners do not igniteProtection Agreements Acuerodes de protección
Top Page Image Contents